|
|
Post by crwford on Apr 23, 2017 16:01:49 GMT -6
you need to trace your wires you have a dead short to frame.
|
|
|
|
Post by crwford on Apr 21, 2017 9:56:48 GMT -6
this sounds silly to also ask if spark and fuel are also present these are just basic things which are needed to make it run.
|
|
|
|
Post by crwford on Apr 20, 2017 21:35:27 GMT -6
Did any body do a compression test?
|
|
|
|
Post by crwford on Apr 14, 2017 20:27:56 GMT -6
try grounding out Gage see if it moves take wire off float and ground it see what happens.
|
|
|
|
Post by crwford on Apr 14, 2017 20:24:27 GMT -6
I'm really puzzled I have 3 300 cc water cooled Ice Bear Zodiac's 2 2015 and 1 2013. Only problem I ever had was rubber intake kept coming lose and excused kept coming lose. Never have I ever screw with the valves I checked the compression when it hit 800 miles. I check it every so often never changed so I don't mess with adjusting them. I have 8,500 mile on 2 0f the only 1,800 on other one. Amsoil is the only oil been in them. Could you maybe find a good small engine shop to check it out maybe more of a mom and pop shop might maybe better. All of mine have much the same stuff which came with them except in the cvt took out the roller and put in the taper ones in there place.
|
|
|
|
Post by crwford on Apr 2, 2017 12:39:08 GMT -6
bearings breaking up it sounds by what your saying to much grease LOL
|
|
|
|
Post by crwford on Mar 31, 2017 19:00:41 GMT -6
Did you adjust the toe you may not need parts. Make a center line on both tire while bike is up in air take tape measure back and front and adjust from there should be toe in a little no much you may need to do it a little at a time till you hit the sweet spot.
|
|
|
|
Post by crwford on Mar 28, 2017 10:16:47 GMT -6
I have a 2012 with a 150 air cooled motor which runs fine. I did a toe in adjustment.
|
|
|
|
DF300TKB
by: crwford - Mar 28, 2017 10:14:15 GMT -6
Post by crwford on Mar 28, 2017 10:14:15 GMT -6
I have a 2012 but only a air cooled 150 cc motor and don't have the shake what do you need to know ?
|
|
|
|
Post by crwford on Mar 24, 2017 21:18:57 GMT -6
You need to follow the circuit to the lights it's a dead short start first looking a the lights see if the lights can be unplugged then look at them hard.
|
|
|
|
Post by crwford on Mar 15, 2017 9:40:03 GMT -6
I have 3 Ice Bear Zodiac's but just thinking every one came out with the chain way to tight. Check the sprockets for damage and then go check the CVT make sure the roller's didn't come out of slots they are to be in and the only way that could happen if main nut came lose and unit came apart. Also noise could be coming from your kick start if you have one if parts came apart or loose. Most are easy to check out with basic tools
|
|
|
|
Post by crwford on Jan 23, 2017 18:43:07 GMT -6
Pull speedo head make sure all connections are well connected.
|
|
|
|
Post by crwford on Jan 11, 2017 18:52:09 GMT -6
Its to bad you don't carry parts for scooter like Dong Fang and Ice bear many people really can't find anyone to help. Some sites say they will but they really don't been there and done it.
|
|
|
|
Post by crwford on Nov 19, 2016 19:40:15 GMT -6
You say it's a 2015 and you need a carburetor why are you trying to get my power?
|
|
|
|
Post by crwford on Nov 14, 2016 19:26:56 GMT -6
Just wondering if problem was ever fixed yet ? And if so what did they find!
|
|
