New Student
Currently Offline
Posts: 3 
A+'s: 0
Joined: Apr 22, 2017 16:32:50 GMT -6
|
Post by fuzz69j on Apr 23, 2017 15:36:27 GMT -6
I just picked up a 2008 MB 54250 B scooter I was told it popped the fuse and wouldn't start afterwards I replaced the 30 amp fuse and when I turn on the ignition it pops again I checked the grounds I resanded the grounds I can't seem to figure out what it could be I tried jumping the starter solenoid which is new but im nor getting any spark. Someone please help!!
|
|
|
|
Post by crwford on Apr 23, 2017 16:01:49 GMT -6
you need to trace your wires you have a dead short to frame.
|
|
New Student
Currently Offline
Posts: 3
A+'s: 0
Joined: Apr 22, 2017 16:32:50 GMT -6
|
Post by fuzz69j on Apr 24, 2017 6:20:36 GMT -6
What do u mean
|
|
|
|
Post by cyborg on Apr 24, 2017 7:28:26 GMT -6
you need to trace your wires you have a dead short to frame. Crawford is correct as usual,,,somewhere (I suspect the main battery to solenoid or solenoid to starter wire) the wire has rubbed thru on a sharp edge and is grounding to the frame ,,,and as a very rare side note I've also have seen starter motors short internally but it's win the lotto odds,,,I've seen it only once in dozens and dozens of builds |
|
New Student
Currently Offline
Posts: 3
A+'s: 0
Joined: Apr 22, 2017 16:32:50 GMT -6
|
Post by fuzz69j on Apr 25, 2017 6:04:03 GMT -6
Thanks guy I'm going to check it out after work!
|
|
|
|
Post by cyborg on Apr 26, 2017 7:06:38 GMT -6
Find it yet ?
|
|
