Vader 125 issues By sumdawgtwigg (Read 921 times)

[sumdawgtwigg]

I really need some help guys. I bought a new vader 125cc grom clone and upon recommendation changed the headlight bulbs to leds. it blew the fuse when i switched to high beams. So, i replaced the fuse and now the dash comes on with no key in it and as soon as i switch it on it blows the new fuse. Switched back to stock bulbs and the same thing is happening. I cannot get it to work and haven't even had the thing started the first time yet. Any help would be greatly appreciated. 

[crwford]

You need to follow the circuit to the lights it's a dead short start first looking a the lights see if the lights can be unplugged then look at them hard.

[cyborg]

I'll throw a guess at a sharp metal edge cut thru a wire and shorting out the system,, or pinched wire