|
|
Post by alleyoop on May 12, 2014 23:33:51 GMT -6
The gear part inside the puck you should see another gear inside the puck going to the cable on the outside. Alleyoop I told you that yesterday . Alleyoop |
|
|
|
Post by alleyoop on May 12, 2014 23:32:33 GMT -6
Yep grills get really hot over 400 degress and the mufflers do not get that hot.
Alleyoop
|
|
|
|
Post by alleyoop on May 12, 2014 12:47:16 GMT -6
|
|
|
|
Post by alleyoop on May 11, 2014 20:50:46 GMT -6
It will just burn off and peel. You have to use something that will take heat like for painting grills.
Alleyoop
|
|
|
|
Post by alleyoop on May 11, 2014 20:18:32 GMT -6
The gear part inside the puck you should see another gear inside the puck going to the cable on the outside.
Alleyoop
|
|
|
|
Post by alleyoop on May 11, 2014 13:17:30 GMT -6
I put a radio on mine and hooked it up to my battery BUT I put a toggle switch OFF/ON so it is not always feeding voltage to the radio only when I want it on.
Alleyoop
|
|
|
|
Post by alleyoop on May 11, 2014 13:15:27 GMT -6
I believe he wants a CDI that advances more?  He could also slot the mounting holes on the PICK UP COIL and move it to the LEFT, that would give it about a 3% advance. Alleyoop |
|
|
|
Post by alleyoop on May 10, 2014 15:22:37 GMT -6
Just got it 2 1/2 weeks ago A SRX Crossover traded in My 2001 STS with 91k on it. Now that we are going to be SNOWBIRDS 1-2 months out of the year down in Florida we thought better to have a newer car with more room to haul stuff  Alleyoop  |
|
|
|
Post by alleyoop on May 10, 2014 11:45:13 GMT -6
Thank you John,
Alleyoop
|
|
|
|
Post by alleyoop on May 10, 2014 0:10:48 GMT -6
They advance but only about 1-2 degrees, not much at all and they jump around a little. If you have a timing light put it on and you will see. They do have advaning CDIs that are FIXED advanced and also like the one I have on it advances starting around 3K but is retarded for start ups so it it easy on your starter clutch.
Alleyoop
|
|
|
|
Post by alleyoop on May 9, 2014 23:10:18 GMT -6
I agree if it does not want to rev past 3K.
Alleyoop
|
|
|
|
saddlebags
by: alleyoop - May 9, 2014 21:08:56 GMT -6
Post by alleyoop on May 9, 2014 21:08:56 GMT -6
Sure they can, but you will have to decide how you want to mount them and where and then make the mounts or figure out how you are going to attach them where you want them to hang.
Alleyoop
|
|
|
|
Post by alleyoop on May 9, 2014 15:27:45 GMT -6
The Idler Gear which you are calling the BENDIX is what engages the CLUTCH STARTER and which the STARTER TURNS. The shaft on that fits into a hole in the INSIDE OF THE COVER you take off so it is aligned straight and holds it in.
Alleyoop
|
|
|
|
Post by alleyoop on May 9, 2014 15:15:19 GMT -6
Put up a picture of your CDI with the wires plugged in to see the COLOR of the wires and where they are plugged into on the CDI. Alleyoop Use this it is free and easy to use: 1. Click on this link: tinypic.com/index.php2. Click on Browse, that will link to your computer. 3. Find what you want to load. 3. Click on the name of the picture 4. Click on OPEN 5. Click on UPLOAD 6. Click on the LINK that starts with IMG. 7. RIGHT CLICK and CLICK on COPY 8. THEN Come here to your THREAD ON DOC. 9. RIGHT CLICK and CLICK ON PASTE. Alleyoop |
|
|
|
Post by alleyoop on May 9, 2014 15:08:28 GMT -6
How do you know there is no Advance, and normally the stock CDI's DO NOT ADVANCE they are timed at a fixed position.
Alleyoop
|
|
..BAD TO THE BONE..