|
|
Post by richardthescooter3 on Jan 12, 2013 9:04:33 GMT -6
Here is what was on scoot. Attachments:
|
|
|
|
Post by richardthescooter3 on Jan 12, 2013 9:00:09 GMT -6
Going to work the other day, as I was climbing up hill my scooter shut off  so I drifted down to a local super market and tried to start my scoot, no start, it would just crank until my battery was dead, called wife, she came, jump scoot with car, still no start  had to tow it home, this where it get interesting. Check thing out I notice that my fuel filter was only half full (bottom part) and not enough gas was reaching the hose going into my fuel pump  so I decide to drain the gas from tank thinking maybe plug up, changed fuel filter, and check for spark, (plug wasn't firing, replace it and it started to fire), put everything together now and still no start, it would just crank, and cranke, so I decide to spray some carb cleaner in the top diaphragm and behold she fired and kept on running, so I guess I'm saying all this to ask what the hack happen, did I have a vacuum lock or what. (I'll show the fuel filter I replace) Attachments:
|
|
|
|
Post by richardthescooter3 on Jan 11, 2013 7:37:06 GMT -6
kz1000st, Awesome scoot. love the color & style  |
|
|
|
Post by richardthescooter3 on Jan 9, 2013 8:29:51 GMT -6
Here pic of my MC 250b roketa scooter Attachments:
|
|
|
|
OUCH!!!
by: richardthescooter3 - Jan 8, 2013 9:09:41 GMT -6
Post by richardthescooter3 on Jan 8, 2013 9:09:41 GMT -6
Welcome back Ernie, good to hear from you, hope your healing up good and having a good recovery. Keep that scoot ready, spring is around the corner.
|
|
|
|
IM back
by: richardthescooter3 - Jan 6, 2013 16:49:25 GMT -6
Post by richardthescooter3 on Jan 6, 2013 16:49:25 GMT -6
Glad your back roboscoot, sorry to hear about your loss of your friend, always remember those good talks you had. Hope you have a better 2013 |
|
|
|
cool video
by: richardthescooter3 - Jan 6, 2013 7:41:15 GMT -6
Post by richardthescooter3 on Jan 6, 2013 7:41:15 GMT -6
Awesome.
|
|
|
|
Post by richardthescooter3 on Jan 5, 2013 19:00:24 GMT -6
Here you go. Attachments:
|
|
|
|
Post by richardthescooter3 on Jan 5, 2013 18:49:11 GMT -6
The disc brakes fit into caliper and there is two bolts that goes through the caliper to keep them in place, make sure they are not loose.  |
|
|
|
Sea Foam
by: richardthescooter3 - Jan 5, 2013 9:24:48 GMT -6
Post by richardthescooter3 on Jan 5, 2013 9:24:48 GMT -6
Another area that is important is to keep the gas tank full, especially now because of winter so the inside of the tank doesn't rust (big problem).
|
|
|
|
Post by richardthescooter3 on Jan 4, 2013 18:55:07 GMT -6
Put a little of the lithium grease on your clutch (just a little on the inside front where the needle bearing are) |
|
|
|
Post by richardthescooter3 on Jan 4, 2013 10:10:16 GMT -6
I just changed my front bearing not to long ago, never did changed the rear bearing, I'll look for some info on it What size is that gear oil bolt? |
|
|
|
Post by richardthescooter3 on Jan 4, 2013 10:05:51 GMT -6
Here pic of variator, #3 should have some grease on when putting variator back together. And a little on # 1 (white or a good lithium grease) Attachments:
|
|
|
|
Post by richardthescooter3 on Jan 3, 2013 18:47:18 GMT -6
|
|
|
|
Post by richardthescooter3 on Jan 3, 2013 10:22:09 GMT -6
You also said you have a high pitched sound 5-15mph  when putting the clutch and variator back together did you put some grease on the boss shaft areas? it could be the belt adjusting it take about 100miles for the belt to go into place. the rear wheel bearing is in your swing arm, if its set up like my 250b scooter |
|
