|
|
Post by richardthescooter3 on Apr 9, 2017 16:38:19 GMT -6
Thanks
|
|
|
|
Post by richardthescooter3 on Apr 8, 2017 12:48:33 GMT -6
Hey guys, bought another wild fire scooter. It will need new mirrors and that little windshield that is attacked on the plastic, anyone know where I can get these items?
|
|
|
|
Post by richardthescooter3 on Apr 5, 2017 19:04:27 GMT -6
Ok, your is different then mine.
|
|
|
|
Post by richardthescooter3 on Apr 5, 2017 19:01:24 GMT -6
My rokdta I didn't have too, it was right in the back like I said
|
|
|
|
Post by richardthescooter3 on Apr 5, 2017 12:57:33 GMT -6
Hey burrhead, I had a rokdta 250 scooter and it had a plug underneath to draun oil and one on Top to put it in. If you have a plug on top, maybe that the drain?
|
|
|
|
Post by richardthescooter3 on Apr 2, 2017 16:13:39 GMT -6
Did you check gear oil?
|
|
|
|
Post by richardthescooter3 on Apr 2, 2017 16:12:47 GMT -6
Did you check gear oil?
|
|
|
|
Starting issues
by: richardthescooter3 - Mar 31, 2017 7:26:50 GMT -6
via mobile
Post by richardthescooter3 on Mar 31, 2017 7:26:50 GMT -6
Now it does take awhile to start one that hasn't been started for awhile because of vaccum, I would hook your jumper cable from car to scooter, don't start car, start scooter let it crank several time and stop, and repeat.
|
|
|
|
Starting issues
by: richardthescooter3 - Mar 30, 2017 18:13:34 GMT -6
via mobile
Post by richardthescooter3 on Mar 30, 2017 18:13:34 GMT -6
Is it cranking at all or cranking but not starting? Did you pull fuel line off and crack to see if gas is pumping? You may have air in gas line, take gas cap loose and pullnline and put back on.
|
|
|
|
Post by richardthescooter3 on Mar 23, 2017 20:50:42 GMT -6
When you got your new carb, did you take to top of carb off and check the diaphragm to make sure its sealed and down tight, that happened to me, bogging down, that is where my problem was,
|
|
|
|
Post by richardthescooter3 on Mar 16, 2017 20:16:26 GMT -6
Check your intake manifold, I had a leak in my roketa scooter right under where the clamp tightens
|
|
|
|
Post by richardthescooter3 on Mar 7, 2017 22:13:44 GMT -6
The screws I had weren't the right ones, they were the only ones I had, so I got looking and came across the right master cylinder bolts, problem solved😎
|
|
|
|
Post by richardthescooter3 on Mar 7, 2017 21:14:39 GMT -6
Thanks. I'll check it out
|
|
|
|
Post by richardthescooter3 on Mar 7, 2017 17:41:47 GMT -6
Got it stop, but I just want to make it safe
|
|
|
|
Post by richardthescooter3 on Mar 7, 2017 17:14:16 GMT -6
Hey guys just discovered a small leak in may master cylinder, when I got this scooter it wàs in bad shape, had to drill this scews to get master cylinder lid off, now leaking around the screw, anyone have an extra lid laying around?
|
|
