New Student
Currently Offline
Posts: 7 
A+'s: 0
Joined: Jul 29, 2016 8:47:43 GMT -6
|
Post by fogler99 on Mar 29, 2017 18:27:05 GMT -6
Getting my JCL out after winter storage. StaBIL was added to fuel.
Battery is good; it just won't turn over.
Thoughts?
|
|
|
|
Post by ellpee on Mar 30, 2017 10:03:49 GMT -6
Any other electricals? (Lights? Gauges? Horn?) If no, don't know JCL electrical but I'd be looking at a main fuse somewhere, or a battery cable loose or corroded to the point of no contact.
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Jul 29, 2016 8:47:43 GMT -6
|
Post by fogler99 on Mar 30, 2017 17:48:37 GMT -6
All electricals work... seems like no fuel getting to engine. Tank is full
|
|
|
|
Starting issues
by: richardthescooter3 - Mar 30, 2017 18:13:34 GMT -6
via mobile
Post by richardthescooter3 on Mar 30, 2017 18:13:34 GMT -6
Is it cranking at all or cranking but not starting? Did you pull fuel line off and crack to see if gas is pumping? You may have air in gas line, take gas cap loose and pullnline and put back on.
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Jul 29, 2016 8:47:43 GMT -6
|
Post by fogler99 on Mar 31, 2017 4:34:39 GMT -6
It Is cranking. Don't know how to pull fuel line and stuff
|
|
|
|
Starting issues
by: richardthescooter3 - Mar 31, 2017 7:26:50 GMT -6
via mobile
Post by richardthescooter3 on Mar 31, 2017 7:26:50 GMT -6
Now it does take awhile to start one that hasn't been started for awhile because of vaccum, I would hook your jumper cable from car to scooter, don't start car, start scooter let it crank several time and stop, and repeat.
|
|
|
|
Post by cyborg on Mar 31, 2017 17:31:27 GMT -6
There is a vacuum actuated valve on the bottom of the fuel tank,,, and there should be a small diameter vacuum line coming off of the intake manifold going to the fuel tap/ valve,, my guess is that line is cracked and not pulling enough vacuum to open the fuel valve,,,
|
|
