New Student
Currently Offline
Posts: 7 
A+'s: 0
Joined: Jul 29, 2016 8:47:43 GMT -6
|
Post by fogler99 on Mar 31, 2017 4:34:39 GMT -6
It Is cranking. Don't know how to pull fuel line and stuff
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Jul 29, 2016 8:47:43 GMT -6
|
Post by fogler99 on Mar 30, 2017 17:48:37 GMT -6
All electricals work... seems like no fuel getting to engine. Tank is full
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Jul 29, 2016 8:47:43 GMT -6
|
Post by fogler99 on Mar 29, 2017 18:27:05 GMT -6
Getting my JCL out after winter storage. StaBIL was added to fuel.
Battery is good; it just won't turn over.
Thoughts?
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Jul 29, 2016 8:47:43 GMT -6
|
Power loss
by: fogler99 - Jul 30, 2016 19:56:15 GMT -6
via mobile
Post by fogler99 on Jul 30, 2016 19:56:15 GMT -6
Very new here. How do I check the ground to frame terminal?
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Jul 29, 2016 8:47:43 GMT -6
|
Power loss
by: fogler99 - Jul 30, 2016 18:20:20 GMT -6
via mobile
Post by fogler99 on Jul 30, 2016 18:20:20 GMT -6
So, brand new battery and still nothing. Is there an easy way to get to the 20A fuse near the muffler? I haven't checked that because the bike was working.
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Jul 29, 2016 8:47:43 GMT -6
|
Power loss
by: fogler99 - Jul 30, 2016 8:59:23 GMT -6
via mobile
Post by fogler99 on Jul 30, 2016 8:59:23 GMT -6
So i've pulled the battery and clean the terminals. The battery was checked and recharged. The scooter started last night and ran as normal. Went for a short ride this morning and all work well. Went to go later this afternoon for a ride and nothing. All electrical power was gone. I thought it could be a fuse near the muffler but I am unable to get to that. Any other thoughts?
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Jul 29, 2016 8:47:43 GMT -6
|
Power loss
by: fogler99 - Jul 29, 2016 8:52:30 GMT -6
via mobile
Post by fogler99 on Jul 29, 2016 8:52:30 GMT -6
When I engage the break to start my JCL 250 scooter I lose electrical power. If I disconnect the battery and reconnect the battery I regain power but but again lose power as soon as I gave the front brake to start the scooter. Any thoughts?
|
|
