New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
no spark
by: accord911 - Jun 13, 2012 22:32:13 GMT -6
Post by accord911 on Jun 13, 2012 22:32:13 GMT -6
 this is my stator |
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
no spark
by: accord911 - Jun 13, 2012 22:27:46 GMT -6
Post by accord911 on Jun 13, 2012 22:27:46 GMT -6
the first picture is the original cdi box , i bought the red one. my stator has a four position conn.
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
no spark
by: accord911 - Jun 13, 2012 22:23:54 GMT -6
Post by accord911 on Jun 13, 2012 22:23:54 GMT -6
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
no spark
by: accord911 - Jun 13, 2012 18:18:13 GMT -6
Post by accord911 on Jun 13, 2012 18:18:13 GMT -6
sorry to confuse you. my stator has a four pin connector and the one you showed me has a three pin. How do i post pictures i have them
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
no spark
by: accord911 - Jun 12, 2012 20:50:09 GMT -6
Post by accord911 on Jun 12, 2012 20:50:09 GMT -6
i notice the cdi box has a 2 pin connector and the stator has a 3 pin connector. can you let me know about this thank you
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
no spark
by: accord911 - Jun 11, 2012 20:38:12 GMT -6
Post by accord911 on Jun 11, 2012 20:38:12 GMT -6
the stator has a blu/ yel and a blk/ red both of them are coming out of the stator. Going to the four pin connector from the stator is a wht/ red , wht ,yel/ red , blk just can't find any four pin connectors only three pin thank you....... ernest
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
no spark
by: accord911 - Jun 2, 2012 13:48:06 GMT -6
Post by accord911 on Jun 2, 2012 13:48:06 GMT -6
2003 50cc moskito scooter doesn't have any spark. changed the cdi box. I don"t know how to test the wires or the coil, i know its has to be one of them. The bike only has 2000 miles on it. please help p.s. do anyone know the the values when you test a coil and how to test a coil. thanks
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on May 15, 2012 20:35:43 GMT -6
anyone can help with this scooter because i'm tired of trying
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on May 14, 2012 16:28:20 GMT -6
The cable is to the top and the mixture screw ison the right of the idle screw. How much do i turn it out if i have it all the way in. It is so hard to crank when it is cold, makes me think the choke not working. If you or anyone have any more ideas to get this bike running good let me know. a guy told me the bike will do this if the crank seals are bad, is this true?
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on May 13, 2012 18:07:15 GMT -6
hello i have a 202t 50cc scooter my piston and cylinder was scratched i was getting 94lbs when i checked the compression. I changed the piston and the cylinder, cleaned the tank and the carburetor. The bike is running rough the starter don't start the bike so i kick start it. the starter just turns over but don't start the bike that is another problem. it takes about 20 kicks to get started. I also changed the intake boot. i removed all screws to the carb so i don't know how many turns the air intake screw should be. i can ride the bike but it will idle up and down and sometimes shut off. It also has a new plug, i put to much time in this bike to be a 2 stroke please help ready to give up on this thing. thanks. Ernest
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on May 10, 2012 3:30:03 GMT -6
hello just wanted to know if anyone knows how to get air out of brake line. I put new pads on and push the pistons back with the bleeder open and let the fluid run out of the reserve. Now when i try to bleed the blakes the pistons not moving and the brake handle just touches the grip. please help
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on May 9, 2012 21:09:49 GMT -6
no pigtail
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on May 9, 2012 21:09:13 GMT -6
yes , you just plug into the diode. so how can i make it work
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on May 9, 2012 17:59:26 GMT -6
I checked the continuity on the diode and my meter did not read, so i jumped the two wires at the plug and my head lights came on. I started the bike and the voltage went up. I looked for that part and i saw a relay for my bike on scooterparts4less is that the same thing. If so can i use a 5 pin relay.
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on May 9, 2012 15:13:59 GMT -6
thanks so much i will try both of you guys info and let you know what happens.
|
|
Here are the photos