New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Oct 14, 2012 19:09:33 GMT -6
ok i'll try
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Oct 14, 2012 14:45:36 GMT -6
It has four bolts on the valve cover and two larger nuts holding this pipe on... It looks just like the picture you displayed.
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Oct 13, 2012 23:14:59 GMT -6
hello, i made a big mistake, i was putting my spark plug back in my roketa 150cc and it begin to get tight. I knew it wasn't all the way down so i continued tightening it and it kept spinning, i was upset, i felt so stupid. I can just more the plug back and forward. When I pulled the plug out , you can see the hole with a crack. My whole day was ruin. I looked on the motor and got these numbers "HS1P57QM7"  does any one know where i can get the part where the spark plug go and how to fix this scooter. THANK YOU SOOOOO MUCH. |
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Oct 9, 2012 20:15:03 GMT -6
i took the scooter apart and didn't find any connections loose and all fuses tested good. i put a jumper on the diode wires to see if the headlights would come on, they didn't . i took the r/r loose and added another one. No different, DO YOU think it can be the stator i have no idea....
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Oct 7, 2012 16:02:08 GMT -6
thank you
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Oct 7, 2012 8:55:40 GMT -6
hello jr awhile ago you gave me valve adjustments for a roketa 150cc and it was perfect the scooter cranked up fine. the guy let someone do work on it and the valves are not right, i could not find the conversation, can you please give me the intake and ex again. i did it at .004 in and .005 ex i remember those was not the numbers you gave me. thank you
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Oct 6, 2012 6:36:52 GMT -6
it sputtered and shut off. i cranked it up yesterday but you can't turn the throtter it will shut off. checking it today, will let you know. thanks
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Oct 2, 2012 21:24:42 GMT -6
hello i was on my way to work this morning and i got a 1/2 mile from my home, the scooter shut down. I push the starter and it started back up but there was no head or tail lights. If you turn the throttle too much it will shut down, so i went slow back to my home. I started it back up no lights but blickers, horn and high beam works (high beam only works when you push the button to flash lights) I replaced the diode and the r/r before. do you think the diode went or something else. thank you ernest
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Oct 2, 2012 19:52:38 GMT -6
ok thanks for the adly web site...i'll tear the motor down soon and see what i need
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Oct 1, 2012 20:16:45 GMT -6
that is exactly the location
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Oct 1, 2012 19:18:43 GMT -6
it's a 2008 and what number i saw was ct150 and under that was "000060" reading what you guys are talking about, its seems to me this kit might be trouble. I think i better just get the replacement parts.
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Sept 30, 2012 9:03:37 GMT -6
Hello I have a friend with a adly thunder bike 150cc it was shutting off and hard to start. It turns out there was a cap full of oil in the motor. He was riding and it made a lot of clatting noises and than it shut off. I check it and thats when I saw how much oil was in it. I checked the compression and there is none. He asked me was there a bore kit for his bike, since it has to be took apart. So I will ask you guys . Do you know all the parts it needs, I know it a four stroke and has 4 valves it says that on the head. If so is there a video on how to take apart the scooter. p.s. if no bore kit is there a place i can get the parts for it. Thanks Ernest
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Sept 26, 2012 3:46:04 GMT -6
hello do any one know the valve adjustment on a 150cc adly thunder bike. Also where should the T and F line should be on the magnito. I believe the valve need adjusting, someone told me on the gear the large hole should be visible. Don't have a clue. Thank you so much....
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on Sept 3, 2012 20:50:57 GMT -6
maybe i'll get a chance tomorrow, thank you
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
no spark
by: accord911 - Sept 2, 2012 21:48:51 GMT -6
Post by accord911 on Sept 2, 2012 21:48:51 GMT -6
thanks I'll let you know soon what happens.
|
|
