New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: May 8, 2012 17:09:37 GMT -6
|
Post by accord911 on May 10, 2012 3:30:03 GMT -6
hello just wanted to know if anyone knows how to get air out of brake line. I put new pads on and push the pistons back with the bleeder open and let the fluid run out of the reserve. Now when i try to bleed the blakes the pistons not moving and the brake handle just touches the grip. please help
|
|
|
|
Post by tvnacman on May 10, 2012 9:45:49 GMT -6
Fill it with fluid bleeder closed pump the brake lever, hold the lever in crack bleeder, close bleeder pump an hold crack bleeder, close bleeder. Watch you don't run out of fluid. . Keep repeteing the above till fluid tins out without air bubbles.
John
|
|
|
|
Post by richardthescooter3 on May 11, 2012 17:29:49 GMT -6
It is hard to get the air bubbles out of the liner, try this. fill your it up, but let the cap off, pump brake lever, then wait, little by little bubbles will rise to the top. (make sure the brake revavor is level.
|
|
Sophomore
Currently Offline
Posts: 89
A+'s: 1
Joined: Jul 14, 2011 20:31:16 GMT -6
|
Post by gatekeeper on May 12, 2012 5:07:28 GMT -6
If you pump the brake lever with the reservoir cap off, do it SLOWLY!! Otherwise you will spray fluid all over the place.  |
|
