Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 10, 2014 10:43:56 GMT -6
Well,new bearing is here,I have it in the tranny cover & still has the same noise as the old one,when turning the shaft by hand...I don't think the bearing was the problem at all. I'm going to put it back together & see how in sounds..But,I think it will solve nothing....
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 8, 2014 18:06:52 GMT -6
I took some emery cloth to the clutch pads & the bell...Will see how everything works when the bearing comes in & I put it together..I think the bearing will make a difference But not convinced it's the problem...
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 8, 2014 12:39:36 GMT -6
it does spin freely....the noise does get worse on acceleration But it is also bad on idle...Well,I guess I need to wait for the gear & see how it siunds after I install it...What really gets me is the clutch seems to work & looks normal.....The noise is defiantly coming from the rear to the scoot.....
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 8, 2014 7:54:25 GMT -6
I checked them & they are good was thinking of putting some grease on them & some on the shaft the clutch goes on when I reassemble it......The noise lessons some when the tire stops,but still have it at idle.....
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 19:38:38 GMT -6
I just had a thought....That shaft don't turn at idle,so I'm still thinking it's the clutch....If that shaft ain't turning,why would I still have the noise? It sounds more & more like something to do with the clutch to me......
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 19:14:27 GMT -6
Ok,I will go turn the wheel,thanks & I will let you know how things turn out.....I hope this does the trick......Thanks
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 19:05:33 GMT -6
Yes thats it alley,I also found it on partsforscooters....I hope this is the problem...Is it ok to start the scoot with the variator & clutch off??? I did & the motor sounded good But it runs very high rpm's,so I shut it off right away.....I did hear a whipping sound,I think it was the end of the crank that the variator goes on....
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 18:45:52 GMT -6
ok,it's out...It's a 6205 bearing....I think the bearing will be easy to find,it's the gasket...Wondering if I could use some form a gasket & use the old one?
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 18:23:49 GMT -6
So,now how do I get it out of there??? And where do I get the parts...Bearing & gasket...
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 18:21:24 GMT -6
alley,the trans is pretty straight forward,I thought it would a mess it's not as bad as I thought to mess with...Now,finding the problem....I think it could be that bearing in that video....
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 18:11:53 GMT -6
Ok,alley,Tell me what you think...At higher rpm's I think this could be the problem.... tinypic.com/player.php?v=2i9h5sj%3E&s=8#.U7s2JrEzRPAlso,is it ok,to start the scoot with the variator & clutch off??? Now if this bearing is the problem,how do I get it out of the cover?? Is it pressed in?? Or is it just that plastic sleeve making the noise... |
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 17:45:26 GMT -6
ok,I'm downloading another video of the area where I think the noise is coming from......Let me know what you think......
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 17:27:48 GMT -6
Ok,on further inspection,it seems like it could be the bearing in the cover that the shaft that the clutch goes onto....There looks to be a plastic cover over it looking at the outside of the cover....When spinning the shaft it don't turn smooth,there is a small grinding noise,which could be multiplied when you apply increased rpm to it...There is a bearing just inside the cover on the same shaft,that seems to be good,it's the one the is pressed into the cover that has a little noise when truning it by hand....
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 17:10:35 GMT -6
ok,removed the tranny cover & pulled all the gears & check out all the bearings & everything looks good,bearings seem to turn very easy & all gear teeth look excellent....i'm wondering if it's the bearing that is on the bracket that the brakes & muffler are mounted on.... or the bearing just behind the wheel...
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 16:54:07 GMT -6
should I have to remove the back tire,before removing the cover??
|
|
