|
|
Post by justbuggin2 on Apr 4, 2013 2:12:55 GMT -6
yea the plastics have to come off to get to the motor and the shoud does as well just bring it to TDC before you pull the camand mark the flywheel where it is at TDC to help get everthing in time
|
|
|
|
Post by justbuggin2 on Apr 3, 2013 9:01:23 GMT -6
Jr telling on yourself again?
|
|
|
|
Post by justbuggin2 on Apr 2, 2013 22:06:47 GMT -6
High intense discharge like the street lights
|
|
|
|
Post by justbuggin2 on Apr 1, 2013 21:25:51 GMT -6
as long you connect a yellow from the stator to a yellow on the harness it does not matter
|
|
|
|
Post by justbuggin2 on Apr 1, 2013 10:03:45 GMT -6
check your fuses
|
|
|
|
Post by justbuggin2 on Mar 29, 2013 13:43:02 GMT -6
yes you should be able to turn the shocket and pull the bulb out the back
|
|
|
|
Post by justbuggin2 on Mar 29, 2013 13:12:03 GMT -6
something else to check pull the spark plug and see if it is fouled out
|
|
|
|
Post by justbuggin2 on Mar 29, 2013 13:08:46 GMT -6
if you have a timing light you can hook it up and tie the trigger in so you can have both hands free when you are trying to start it if it is flashing then you know you have spark
|
|
|
|
Post by justbuggin2 on Mar 29, 2013 9:33:29 GMT -6
Flintstone is right about the headlights now about the buzzing noise it is the ing being pick up in the stereo and old timer trick to take care of it was to put a knott in the coil wire just a simple slip knott will do
|
|
|
|
BREAKS
by: justbuggin2 - Mar 28, 2013 8:58:43 GMT -6
Post by justbuggin2 on Mar 28, 2013 8:58:43 GMT -6
when you get the new one on you can that the old one apart and see if you can find O-rings to rebuild it with
|
|
|
|
Post by justbuggin2 on Mar 26, 2013 22:29:17 GMT -6
sorry that things can not work out the other way but at least you have made good plans for them and i know everthing will work out in the end will be thinking of you and them wishing the best and hoping for a quick return
|
|
|
|
Post by justbuggin2 on Mar 26, 2013 22:12:29 GMT -6
any place that you get a good metal spot to bolt to will be ok
|
|
|
|
Post by justbuggin2 on Mar 26, 2013 22:09:47 GMT -6
hang in there and remenber that it is fun to work on this bike and if you get mad at it walk away for awhile
|
|
|
|
Post by justbuggin2 on Mar 26, 2013 8:33:08 GMT -6
heck the grounds you may have left one loose
|
|
|
|
Post by justbuggin2 on Mar 25, 2013 9:42:29 GMT -6
i agree that you dont want deep sratches in the belt side but it does not need to be polish like a mirror ether
|
|
