|
|
Post by richardthescooter3 on Sept 20, 2012 18:04:42 GMT -6
Today when I got home I checked the enricher and it was hot (that's good) it seems to be working now, I'll keep an eye on it.
|
|
|
|
Post by richardthescooter3 on Sept 20, 2012 8:40:37 GMT -6
Alleyoop, I set my volt meter the same as testing battery, put black connection neg side of battery, the red on a metal connector on enricher, I got (524). did I test it right. (scoot was only running about 3-4 mins, I'm going to let it run longer and try again.
|
|
|
|
Post by richardthescooter3 on Sept 19, 2012 7:17:48 GMT -6
How do you check the feed to the enricher? Last night I did unplug and replug in the enricher and there was some wires exposed, so I tape them up making sure everything was tight.
|
|
|
|
Post by richardthescooter3 on Sept 18, 2012 20:09:27 GMT -6
I have notice that certain times my idle is high, tonight when i got home from work, idle was high and my enricher was cold, it seem to me that my enricher isn't worker right, I think it is shutting off and on. (I'm thinking bad enricher)
|
|
|
|
Post by richardthescooter3 on Sept 16, 2012 21:01:19 GMT -6
Hey, whatever work the best Bob  I'm still teachable |
|
|
|
Post by richardthescooter3 on Sept 16, 2012 20:50:52 GMT -6
Bob, That's a good idea  I never thought about doing it that way, that could work if you could get the front end off enough to get into it. I do agree with you, it was a pain to take off and put on. I should have know that you would come up with another good idea Bob, it will turn when you remove that clip. |
|
|
|
Post by richardthescooter3 on Sept 16, 2012 12:38:31 GMT -6
Bob, Because of this clip to hold your bulb in, underneath may not be a good choice. Attachments:
|
|
|
|
Post by richardthescooter3 on Sept 16, 2012 6:19:54 GMT -6
Here is a picture of the front of my scoot. Attachments:
|
|
|
|
Post by richardthescooter3 on Sept 16, 2012 6:18:26 GMT -6
If you have the Honda Reflex clone body style like my scoot the front has to come off. Attachments:
|
|
|
|
Post by richardthescooter3 on Sept 15, 2012 14:16:11 GMT -6
Update Found out why it took so many cranks to start scoot, I was checking my needle jet and discovered that it wasn't put in right, the spring was pushed aside and not on my needle, I was making sure where my clip was. Now it start up good & fast) |
|
|
|
Post by richardthescooter3 on Sept 15, 2012 14:09:19 GMT -6
Thanks JR |
|
|
|
Post by richardthescooter3 on Sept 15, 2012 9:33:59 GMT -6
What mm would the well nuts be for the mc-54-250b roketa scooter?
|
|
|
|
Post by richardthescooter3 on Sept 14, 2012 6:59:32 GMT -6
JR, about 2 years ago I had loose power and knocking, my buddy and I adjusted the valves and discovered the top intake nut came off and luckily we found the nut in the bottom of the exhaust valve area |
|
|
|
Post by richardthescooter3 on Sept 13, 2012 17:37:02 GMT -6
Me too, glad to see you back on the forum, keep us updated. My thoughts and prayers are with, praying it all works out. (We all make mistakes, so hang in there) |
|
|
|
Post by richardthescooter3 on Sept 6, 2012 18:18:00 GMT -6
I'm sure we had this discussion about the140/60/13, I have the mc-54-250b roketa and I know they will fit mine, I think JR has these on one of his scoots if am not mistaken. Not sure what brand makes them.
|
|
