New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Sept 13, 2013 15:19:18 GMT -6
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Sept 20, 2012 6:59:52 GMT -6
New Project with a problem – Need Help- Cracked Carb Bowl
Picked up a 2007 50cc
Make : Tizhou Scooter
Found out that the bowl on the carburetor has a cracked /broken off at the screw area and it leaks gas.
It needs a new bowl.The bowl has 3 screws to attach to the carburetor
Carb is a Kunfu which has an injector and an electronic chock on it.
I am hoping someone has the bowl in their junk pile to get this scooter running.
I can send you pictures by email.
My email address is: melalice2004@aol.com
Thank you kindly,
Mel
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Nov 12, 2011 17:48:54 GMT -6
alloyloop
great pics on hard starting
i could not find the way to pm to you
breather tube that comes out from front of the engine does it have a hose and where does it go
do you have picture of the full top of the as in hard standing topic showing the breather hose plus the top of the engine
thanks mel
melalice2004@aol.com
located nothern burbs of chicago
please get back
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Nov 2, 2011 21:00:13 GMT -6
JR Thanks for your good work. I will check these sites out . Today was a great day. I found out the story on the scooter and contacted the grandmother who bought the scooter for her granddaughter. She had the title and her son had the key. they were very gracious to me both. So now I will reconnect the ignition and try starting it with the key and then I will have and hope this scooter will run. I noticed a few things that were missing such as the gas tank that I will use a lawnmower gas tank to test it out but I could use a good used one plus both mirrors are broken and it seems like someone removed the center stand from the scooter. If you know of anyone or a site that I could get good reasonable parts - new or used - please let me know. Again, thank you for all of your help. Mel  |
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Nov 1, 2011 19:54:57 GMT -6
thanks
JR
gasket only the part number is #12391-460-770
Another project is replacing a gasket on cylinder cover which the part number is #12391-460-770 for a 1982 Honda Nighthawk 650cc SC.
I am wondering if you could locate this part on an ebay site like you did for the lock cylinder?
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Nov 1, 2011 14:00:40 GMT -6
JR Thanks for the quick comeback. I spoke to a locksmith .\ He wanted somewhere near $20 - $35 to make a key without the code. The ebay site was total with shipping $29.95 - very good. Thankyou, You are a wealth of information Another project is replacing a gaskert cylinder cover which the part number is #12391-460-770 for a 1982 Honda Nighthawk 650cc SC. I am wondering if you could locate this part on an ebay site like you did for the lock cylinder? It was a better price and the site offered free shipping. I would appreciate if you could into this for me and get back. Thanks, Mel |
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Nov 1, 2011 6:28:11 GMT -6
New project
Scooter Baja 125cc 2006
Came without a key
Is there any key code somewhere on the bike?
How do you get a new key made up?
Is the key for the ignition the same key for the seat?
Please get back.
Thank you,
Mel
is this a chinese scooter? or ?
melalice2004@aol.com
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Oct 28, 2011 15:48:41 GMT -6
thanks jr
i would like to have
need pics of the engine with hoses
it looks like some are missing ?
its missing center stand
mirrors
some plastic
thanks
mel
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Oct 27, 2011 16:20:22 GMT -6
Hi,
Newbie with a new project.
I just acquired a Baja Scooter 125cc SC
It says on it that it is Zongshen Industries Group Co. , Ltd.
Also engine family – 6ZGNCO12NFG
Year: 2006
You guys are the smartest group on Chinese scooters.
I would like to know where can I download a free manual because it looks like somethings are not connected properly.
Thanks,
Your friend,
Mel
melalice2004@aol.com
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Aug 9, 2011 7:02:13 GMT -6
jr
one of many i saw is a velux diamo unit
has anyone put one together ?
mel
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Aug 8, 2011 20:50:25 GMT -6
how to built a scooter with a roof ??
has anyone built a scooter with a roof ?
it look's neat looking and different
i googled scooter with a roof and they had 1,560,000 pictures
I have noticed people have put 3 wheels on the back of a scooter.
Has anybody put a roof on a scooter?
And if they have, how did they do it?
Thanks , Mel
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Aug 7, 2011 20:31:56 GMT -6
Information needed on canopy top on a scooter:
When I was looking on U tube regarding the variator, one of the people had a scooter with a canopy looking top on his scooter.
Is this option available through an accessory dealer?
If anybody knows, please get back to me.
It looked like something I saw on a trip in Europe years ago.
Thanks,
Mel
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Aug 5, 2011 15:01:43 GMT -6
Question: As in the picture the hub that has the fins on it, what is that called?
Is the variator behind this hub with the fins?
You are talking about removing a nut. Is this the nut that is holding the hub with the fins on it?
Also, where is the boss that must be cleaned and lubricated?
What other parts need to be lubricated?
what parts need to be degreased?
Is there any U tube videos that I can go to the library and look at that explains things in more detail?
Thanks, Mel
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Aug 5, 2011 6:48:27 GMT -6
What is the skill level of cleaning the variator??
Good Morning
I was able to get the head lights working by playing with the wiring and fuses.
Going back to the hesitation/shaking when you first give it gas for the first 5 seconds or less, you mentioned regarding cleaning the variator
The variator, I believe, is under the side cover where the belt is.
Do you have to remove the variator and take it apart?
It looks like a lot of time and work to do this, am I correct?
I am afraid once I take it apart, if I have to take it apart, I can run into more problems than it is worth.
I can understand cleaning something that is attached and together versus dismantling it and finding myself having a bunch of sliders and etc.
You mentioned the shaft/boss.
It also seems like you have to take more things apart.
Is there a step by step instructions on how to clean this?
Thanks, Mel
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: Jul 25, 2011 22:03:57 GMT -6
|
Post by mela on Aug 1, 2011 11:37:20 GMT -6
how to make windshield ??
whats the correct way to cut plastic ??
thinking about making one
thanks mel
|
|
