New Student
Currently Offline
Posts: 32
A+'s: 0
Joined: May 26, 2013 14:40:09 GMT -6
|
No spark
by: csmithjump - May 26, 2013 22:26:28 GMT -6
Post by csmithjump on May 26, 2013 22:26:28 GMT -6
I have a roketa Bali 250 and I am not getting any spark from the spark plug. The plug is new. Any suggestions would be helpful.
|
|
|
No spark
by: tvnacman - May 27, 2013 7:41:33 GMT -6
Post by tvnacman on May 27, 2013 7:41:33 GMT -6
is the kill switch in the run position , is the battery fully charged ?
John
|
|
New Student
Currently Offline
Posts: 32
A+'s: 0
Joined: May 26, 2013 14:40:09 GMT -6
|
No spark
by: csmithjump - May 27, 2013 8:02:24 GMT -6
Post by csmithjump on May 27, 2013 8:02:24 GMT -6
Battery is fully charged and kill switch is in the left position by the circle symbol. However I tried it the other way to be sure, same result. Does this scoot have a safety switch that engages when the bike stand is down? I have not tried it with the stand in the up position, but not sure if that makes a difference. Thanks.
|
|
|
No spark
by: tvnacman - May 27, 2013 9:57:13 GMT -6
Post by tvnacman on May 27, 2013 9:57:13 GMT -6
I'm not sure about the kick stand switch myself . Try it with it up , if no go check the fuses . Do you have a meter ?
John
|
|
New Student
Currently Offline
Posts: 32
A+'s: 0
Joined: May 26, 2013 14:40:09 GMT -6
|
No spark
by: csmithjump - May 27, 2013 11:31:15 GMT -6
Post by csmithjump on May 27, 2013 11:31:15 GMT -6
The scoot is kept at my job in the garage. I am going to try starting it with the bike stand and kick stand up, and pray that it works. As to the fuses, there are none. The guy I bought it from tried to wire in some custom speakers, and my guess is that he by passed the in line fuse on the red line to the battery. I don't think this model has a fuse box. Well this one doesn't anyways. So I cleaned up all the wiring problems and took off his speaker wire and have everything working, except no spark as mentioned.
|
|
New Student
Currently Offline
Posts: 32
A+'s: 0
Joined: May 26, 2013 14:40:09 GMT -6
|
No spark
by: csmithjump - May 27, 2013 11:55:34 GMT -6
Post by csmithjump on May 27, 2013 11:55:34 GMT -6
Well I tried with the kickstand up and no luck. I do have a meter. Any suggestions would be greatly appreciated.
|
|
|
No spark
by: tvnacman - May 27, 2013 12:00:21 GMT -6
Post by tvnacman on May 27, 2013 12:00:21 GMT -6
go to the red wire on the cdi and see if you have 12vdc with the key switch in the run position .
John
|
|
|
No spark
by: bobf - May 27, 2013 13:40:14 GMT -6
Post by bobf on May 27, 2013 13:40:14 GMT -6
|
|
New Student
Currently Offline
Posts: 32
A+'s: 0
Joined: May 26, 2013 14:40:09 GMT -6
|
No spark
by: csmithjump - May 27, 2013 13:50:08 GMT -6
Post by csmithjump on May 27, 2013 13:50:08 GMT -6
John: the cdi does not have a red, but it does have a red/white. The vdc on the red/white is 4.7.
|
|
New Student
Currently Offline
Posts: 32
A+'s: 0
Joined: May 26, 2013 14:40:09 GMT -6
|
No spark
by: csmithjump - May 27, 2013 13:54:24 GMT -6
Post by csmithjump on May 27, 2013 13:54:24 GMT -6
Here is a pic if the CDI. Attachments:
|
|
New Student
Currently Offline
Posts: 32
A+'s: 0
Joined: May 26, 2013 14:40:09 GMT -6
|
No spark
by: csmithjump - May 27, 2013 13:57:18 GMT -6
Post by csmithjump on May 27, 2013 13:57:18 GMT -6
Bob: I believe I have the vertical engine. Here is a pic (best I could do without taking off the plastics) Attachments:
|
|
|
No spark
by: tvnacman - May 27, 2013 14:03:58 GMT -6
Post by tvnacman on May 27, 2013 14:03:58 GMT -6
on the two wire connector based on you picture . check the black wire in the two wire plug on top for 12 vdc.
John
|
|
New Student
Currently Offline
Posts: 32
A+'s: 0
Joined: May 26, 2013 14:40:09 GMT -6
|
No spark
by: csmithjump - May 27, 2013 14:09:29 GMT -6
Post by csmithjump on May 27, 2013 14:09:29 GMT -6
The black wire is showing 12.67
|
|
|
No spark
by: alleyoop - May 27, 2013 14:11:24 GMT -6
Post by alleyoop on May 27, 2013 14:11:24 GMT -6
Yes that is the Helix 244c Veritical motor.
|
|
|
No spark
by: tvnacman - May 27, 2013 14:16:21 GMT -6
Post by tvnacman on May 27, 2013 14:16:21 GMT -6
ok you have power to the cdi . check the red wire for pulse while cranking . .5vac +
John
|
|