Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 16, 2012 7:09:43 GMT -6
is it possible that the guy who had it before me put in the wrong size seal? how would I find out if the dimensions are correct?
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 16, 2012 7:05:31 GMT -6
check... we are all good on that
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 15, 2012 10:50:47 GMT -6
I was told this could also be the cause of why my seal isn't sealing ;D
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 15, 2012 10:42:49 GMT -6
where is the crank case vent located?
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 15, 2012 6:24:58 GMT -6
In another forum, someone told me that the seal is pushed in too far and needs to be flush. is this true?
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 15, 2012 6:23:56 GMT -6
alley said i installed it correctly with the numbers out
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 14, 2012 19:45:42 GMT -6
where can I get some of this RTV stuff... I'm bout tired of messing with it. i don't feel like waiting another week for one in the mail.
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 14, 2012 19:35:57 GMT -6
it's clean and snug. it is the same size I believe. maybe there is a piece of something or another still in it
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 14, 2012 18:56:33 GMT -6
50cc I believe... the side with the numbers... that is the only seal I have... i was also going to ask, is it normal for it to leak oil after just putting a new seal in... does the seal need to "set" in it or something?
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 14, 2012 16:34:58 GMT -6
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 14, 2012 16:02:23 GMT -6
I put in a new crankshaft oil seal. and it is still leaking oil. are there other possible causes?
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 14, 2012 15:55:07 GMT -6
So I put the new seal in... granted I have no clue what I'm doing. I pushed it in until it seemed to "stop". I hope that was what I was supposed to do. Couldn't find any videos on it. It is still spewing oil into the CVT once again. I don't know what to do with this thing. it has been out of commission for a month now.
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 14, 2012 14:38:20 GMT -6
can I use the impact wrench to tighten the nut back on the crankshaft or do I have to have a torque wrench? if so, how tight do I need the nut?
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 8, 2012 16:54:49 GMT -6
I just want to make sure to do it right the first time, so i don't have to worry about this again.
|
|
Junior
Currently Offline
Posts: 156
A+'s: 7
Joined: Mar 2, 2012 10:43:19 GMT -6
|
Post by lazerorca on May 8, 2012 15:34:50 GMT -6
This is what I think i can read... "TC 19.8" and 35
|
|
