|
|
Post by o0ohakko0o on Sept 1, 2015 0:36:37 GMT -6
Ive tried to add some photos to make sure this is correctly done ok from the break switch as you can see below  the 2 wires which are Solid Black and Green/Yellow... The black wire is going off the key switch picture below  and the Green/Yellow wire is going into the harness as you can see below  The other break switch which is coming from the harness which has a solid Black and Green/Yellow wire.... The solid Black wire is going to  And the Green/Yellow wire is going to the solinoid relay picture below  |
|
|
|
Post by o0ohakko0o on Aug 31, 2015 23:28:11 GMT -6
Ok JR i hope ive got it right but i have hooked up the black wire coming from break off the key switch and the green/yellow wire from the same switch to green/yellow in the harness. hooked up the the other break switch coming from the harness the black wire to any black in harness that has 12v and the green/yellow to pigtail of the solinoid relay. the pigtail coming from the solinoid relay that has female plug has a red/yellow wire and solid green wire that is connected to male plug and at the front of thequad near ignition i have this  i hope i have hooked it up as said to ? |
|
|
|
Post by o0ohakko0o on Aug 26, 2015 12:00:32 GMT -6
In the process JR of doing the wiring ok I'll get back when it's all complete  ? |
|
|
|
Post by o0ohakko0o on Aug 25, 2015 1:54:23 GMT -6
Ok im in the process of these steps you have provided me JR cant thank you enough again
just another quick question ok Can i extend the wires if needed with the same color code and using those bullet head connectors ? this is only if i have to ok ... will this be fine ? Ok sorry I'm little confused ...... When you mean HOOK UP for an example ( You said for me to hook up black wire off break switch to black wire off of key switch ) now does that mean splice into it OR take the black wire out of plug ( like the video I watched in the link you give me ) from key switch and connect both directly with bullet connectors ? Sry I hope I have not confused you now I just want to make sure
|
|
|
|
Post by o0ohakko0o on Aug 23, 2015 19:28:39 GMT -6
Hi again JR you are great doing it like this step by step etc it is the way to go and it makes it easier on me to know what you are asking for i can't thankyou enough........ So here is the picture of the plug on the key switch  ______________________________________________________________________________________________ And here is the colors of the wires on the key switch which are : Black , Red , Green and Black/White strip  ______________________________________________________________________________________________ The color of the wires coming from Switch , Start , Kill , Light picture below  The wire colors are : Black , Red , Green , White , Yellow and Black/White strip Also coming from the switch is another plug which is Blue and Brown.  _______________________________________________________________________________________________ And the solenoid relay has a pig tail on it and the color of those 2 wires are: Yellow/Red strip , Yellow/Green strip  |
|
|
|
Post by o0ohakko0o on Aug 22, 2015 3:06:37 GMT -6
Sorry for the pictures being like the way they are my bad
|
|
|
|
Post by o0ohakko0o on Aug 22, 2015 3:04:54 GMT -6
OK the thin red wire with the fuse on it is connected up with the positive wire  and the thick red wire is going directly to the solenoid  The red thin wire with the fuse is going to a splice  after the splice it forks off to the regulator  and the other forks off to the ignition key barrell which is not yet connected at the moment  I have a key start with an on and off kill switch and electric start button  The wires in picture 4  are going into a splice which then connects to a plug  then goes to the solenoid but there are alot of splicing from that green/yellow-stripe which forks to this  and also to this  and also goes to the rear light plug. there is alot of slicing from ground wires that are coming from different places The thick black wire battery cable goes to the engine frame as you see  And the thin green wire that is joint with the thick black wire goes into a splice  with many other gorund wires  I hope this helps please if not maybe rewire completely step by step i dont know |
|
|
|
Post by o0ohakko0o on Aug 20, 2015 19:39:10 GMT -6
no only on the right side the cable is coming from the break # On the 2nd piture this is coming out from the 1xQuad cluster switch. #On the 3rd picture this says (Break Wires Must Be Connected To Start) and is coming from wiring harness. #On the 4th picture this is also coming from the wiring harness next to the one that says break wires must be connected to start. #On the 5th picture this is coming from the wiring harness with green wire and black/white-stripe saying kill switch and the other sayng rear light but im not worried about rear light. #On the 6th picture this is coming from wiring harness and is 2 wires black and green/yellow stripe pictues of the bike whole   |
|
|
|
Post by o0ohakko0o on Aug 20, 2015 16:19:33 GMT -6
|
|
|
|
Post by o0ohakko0o on Aug 19, 2015 21:12:31 GMT -6
i hope this helps please my children are upset
|
|
|
|
Post by o0ohakko0o on Aug 19, 2015 21:11:11 GMT -6
|
|
