|
|
Post by o0ohakko0o on Sept 12, 2015 22:54:04 GMT -6
Ok JR thanks and I just tested 3 brand new coils with my multimeter set to 200ohms and they are all coming back with 00.6 ? Also tested a 4th one and the reading has come back with 01.7
|
|
|
|
Post by o0ohakko0o on Sept 12, 2015 21:46:37 GMT -6
The oil was very bad (black as) JR what oil should I use and does it have to be motorcycle oil or can it be 10w40 car oil ?
|
|
|
|
Post by o0ohakko0o on Sept 11, 2015 23:32:20 GMT -6
Ok JR i just gave my old carby a realy good clean out just thought id try and see what happened put it all back together and back on and tries to start still no luck BUT when i sprayed carby cleaner down the carby and tried to start it it was backfiring out where the air filter attaches to also sprayed some fuel down the spark plug hole and she was backfiring in the chamber ? has not backfired like this before since today also I spoke to my sister and she said the quad stopped because of wiring and in total the bike hasn't been started for the last 3/12 yrs
|
|
|
|
Post by o0ohakko0o on Sept 11, 2015 22:11:12 GMT -6
Ok JR all put back together all the timing matches up just have to buy a carby now ok most probably be on monday
|
|
|
|
Post by o0ohakko0o on Sept 11, 2015 21:13:32 GMT -6
Ok JR got the flywheel off not a problem here is the woodruff key PERFECT CONDITION.   |
|
|
|
Post by o0ohakko0o on Sept 11, 2015 4:57:02 GMT -6
Ok JR cheers I'll give the flywheel a shot tomorrow ok let you know the outcome of the flywheel and with those Allen key bolts in the flywheel do you know if I have to take those off or just the centre nut ?
|
|
|
|
Post by o0ohakko0o on Sept 10, 2015 22:33:26 GMT -6
Ok thanks JR for some researching also when I take the flywheel off do need to remember the markings like for instance T ?
Also JR I just want to confirm the solid green wires ok
From negative side attached with the thick black wire that is grounded to the engine the solid green wire is going to the yellow wire up in the handlebar switch ok now I've got the SOLID GREEN wire spliced about half way connecting off to different parts of the motorbike
Solid Green going to key switch
Solid Green going to cdi
Solid Green going to coil that is correct yes ?
|
|
|
|
Post by o0ohakko0o on Sept 10, 2015 22:05:46 GMT -6
this is my stator magneto case which the stator sits in  and the flywheel and the stator magneto sits in side there when case is put onto quad  |
|
|
|
Post by o0ohakko0o on Sept 10, 2015 18:16:26 GMT -6
we'll im sure its a 110cc what ealse will tell me that it is 100% 110cc ?
|
|
|
|
Post by o0ohakko0o on Sept 10, 2015 18:05:13 GMT -6
Ok JR here is my flywheel  |
|
|
|
Post by o0ohakko0o on Sept 10, 2015 6:40:49 GMT -6
Hi there JR I had a go getting the flywheel off but no luck , I was able to stop the flywheel from turning but was unable to budge the three Allen key bolts inside the flywheel and also was unsure how to take the large centre nut off as well . I haven't really done this kinda stuff before apart from the basics but I guess I'll give it another shot tomorrow and I'll try and buy a carby in the morning misses not to happy with me lol have spent quiet a bit of money on this quad like tools and I bought 2 harnesses for it 4 new tyres and bits and peices but I'm determined to get it going for my kids I mentioned a new motor to her lol no chance
|
|
|
|
Post by o0ohakko0o on Sept 10, 2015 0:18:19 GMT -6
Should I start dissembling the engine and look at Pistons ? I don't know what I'm doing but whatealse can I do obviously I'd have to buy gasket kit
|
|
|
|
Post by o0ohakko0o on Sept 9, 2015 22:40:44 GMT -6
nope there both fine JR those rocker arms and with that popping with the exhaust off it was not really loud just when I was turning it over it was making popping sounds
|
|
|
|
Post by o0ohakko0o on Sept 9, 2015 22:20:11 GMT -6
I will check out that video JR and will buy a new carb but can I just ask 1 question ok if I squirted gas in the spark plug hole put the spark plug back in etc and then tried to start it wouldn't it try to start or maybe backfire or some sign of trying to start. ?
With that video I don't have some of those special tools can I try with other tools lol
|
|
|
|
Post by o0ohakko0o on Sept 9, 2015 22:11:46 GMT -6
It definetly hasn't jumped a tooth and chain is not broken after watching a video on valve adjustments it all is lining up the T and the other part where the chain going around in the cylinder head I has a line pointing at 9:00 I between the two bolts if I make sense there lol I hope you understand what I am saying
|
|
