|
|
Post by o0ohakko0o on Sept 4, 2015 20:37:01 GMT -6
Yes that is correct light lights up after that test ( it lights up with key switch on or off )
|
|
|
|
Post by o0ohakko0o on Sept 4, 2015 19:52:30 GMT -6
Getting nothing JR I don't know what to do now...I'm 100% sure all wiring is correct ?
|
|
|
|
Post by o0ohakko0o on Sept 3, 2015 21:16:47 GMT -6
Ok JR I've connected it up as you told me to when I put the test light on to the plug that connects to the pigtail of the solenoid (test light on the green/yellow and pressing the start button I'm getting nothing) but when I put the test light onto the red/yellow and press the start button the test light lights up with the key on or off it lights up either way  Ok from the plug of the key switch as you see in picture above i've got.... Black/White going nowhere @ the moment. Solid black to break switch. Solid Red directly connected up to fused wire. Solid Green from key switch spliced going the negative side of battery and to Blue wire. Red/Yellow going from male plug that connects to the pigtail of solenoid going to the Brown wire. And Green/Yellow from male plug that connects to the pigtail of solenoid going to the break switch. Here is a picture of what my break light switch is obviously out of the break @ the moment to show you  |
|
|
|
Post by o0ohakko0o on Sept 3, 2015 16:28:15 GMT -6
The wire colors are : Black , Red , Green , White , Yellow and Black/White strip (not worried about blue and brown wires we know what to do with these) these wires are coming from the plug  which lead up to this picture below ( not sure what to do with these color wires Yellow , White ?  Are we gonna work on these later JR ? |
|
|
|
Post by o0ohakko0o on Sept 3, 2015 7:02:44 GMT -6
Ok JR i will get into it in the morning ok 11:00pm here now and I say again thank you very much for all your patience and hard work for trying to get this quad going for my children as they ask me while I'm out the back yard trying to fix the quad ( is it working dad it it working dad ) lol not yet boys but hopefully soon cheers JR. as we know the cdi has numerous Color wiring and also the electric kill switch/start/lights etc the engine wires will I disconnect them from the bullet connectors just thought I'd pop that that in but I guess we talk about that later
|
|
|
|
Post by o0ohakko0o on Sept 2, 2015 22:30:52 GMT -6
ok i will try to trace back some things is there a way to start from scratch with all new wiring as i have heaps of it so many wires in this harness  Another question should I be getting power from pigtail red/yellow from starter solenoid or green/yellow either ? As I'm using a test light now |
|
|
|
Post by o0ohakko0o on Sept 2, 2015 22:01:25 GMT -6
Ok JR not getting a reading either way at all 0.00
|
|
|
|
Post by o0ohakko0o on Sept 2, 2015 21:37:58 GMT -6
Ok im getting a reading on red wire to the key switch has indeed got voltage 12.98
Then turn the key on and put one lead of the volt meter to the black out of the key switch and the other lead to ground to see if the key switch is passing 12Vdc.
And yes also reading 12.98
|
|
|
|
Post by o0ohakko0o on Sept 2, 2015 21:26:31 GMT -6
ok im sure it is all correct but i still have this in the harness a male 2 wire plug solid black and green/yellow with a tag on it says (To break , Break wires must be connected to start  |
|
|
|
Post by o0ohakko0o on Sept 2, 2015 21:04:47 GMT -6
ok thats what i thought thats how it is ok now im using a multimeter when i put 1 probe onto the red wire on the key switch (battery side) and the other probe onto the positive of the battery there is no reading but when i put the probe onto the black (negative) sid of battery i get a reading of power Ok what you say in reply #27 is all correct |
|
|
|
Post by o0ohakko0o on Sept 2, 2015 20:52:18 GMT -6
Sorry JR there is power on red wire battery side i just edited reply #24
|
|
|
|
Post by o0ohakko0o on Sept 2, 2015 20:34:57 GMT -6
Yes this is the Key Switch wiring plug and the color are correct
Red to Red
Green to Green
Black to Black
Black/white to black/white
when i just tested power 12Vdc on the red wire on the side going to the battery there was power
just another question the pigtail on the starter solenoid the two wires yellow/red and yellow/green i have the positive (red) thick wire on yellow/red and the electric starter wire on the yellow/green does this have a matter or no ?
|
|
|
|
Post by o0ohakko0o on Sept 2, 2015 20:20:04 GMT -6
ok my bad there is spark when the solid green is connected to blue or isnt i just checked it key switch wires are solid black coming from break , solidd black going into the harness,solid red ,and black/white. The second picture is coming from the key switch plug blow my thumb there is power on black/white when key switch is off but when i turn the key switch on there is no power if it makes sense im sorry for all this   |
|
|
|
Post by o0ohakko0o on Sept 2, 2015 19:00:48 GMT -6
Nothing jr pressing the electric start button is doing nothing I've put a test light on the plug connecting to key switch when it is turned off ( key) the test light comes on but when ignition key is off the test light works but I don't know if this has got anything to do with it I'm struggling now ? Everything is brand new stator ,harness, starter fuse is good. i am confused lol but there seems to be power through black/white wires if you got fb messenger or something be good but if not does not matter just i have to wait nearly 24hrs in responce as we are in different parts of the world lol. Oh and i dont have any lights connected up at all as i dont want the lights the plugs are just dangling with them not connected to anything |
|
|
|
Post by o0ohakko0o on Sept 1, 2015 16:01:31 GMT -6
Ok so that blue and brown wire is going to the switch and looks like its connecting to the electric start button  
And i still have this plug here doing nothing but if you like we can wait for this BELOW  |
|
