|
|
Post by crazedfox on Mar 11, 2014 17:46:05 GMT -6
Just my luck.
You can find a $20 scoot & get it to run.
I get a equivalent to a $100 scooter & can't get it run.
:[
Somedays I feel machines don't like me…
|
|
|
|
Post by crazedfox on Mar 11, 2014 17:27:56 GMT -6
Sorry, Alley.
I know not to use pliers for that.
It's just that I get paid once a month.
(SSI/disability)
& most of the time I have to work
on tight shoestring buget.
& in frustration I get turned around & mess up.
Which upsets me even more.
_
|
|
|
|
Post by crazedfox on Mar 11, 2014 9:40:04 GMT -6
Hey, Alley-
Yeah fuel has been overflowing due to
float needle getting stuck.
Or
It's being overpowered by the weight of the fuel in the oversized fuel line.
& there is no petcock valve.
I have a pair of locking pliers
on the line when not in use.
----
Anyway,
I have to change out the l fuel line
back to the smaller size.
Mostly, because this problem seems
to have started when I up-sized the line.
So changing back to stock size should stop
overbearing weight of fuel on the fuel float needle.
_
|
|
|
|
Post by crazedfox on Mar 11, 2014 9:25:43 GMT -6
Good to hear from you guys.
So anyone got pictures of said mods?
|
|
|
|
Post by crazedfox on Mar 10, 2014 23:26:54 GMT -6
This forum is a quite one...
Thought for sure that some folks would post by now.
|
|
|
|
Post by crazedfox on Mar 10, 2014 23:24:22 GMT -6
No reply to this query?
_
|
|
|
|
Post by crazedfox on Mar 10, 2014 23:23:07 GMT -6
Bump.
I'd like to know to measure a crank & piston-arm.
_
|
|
|
|
Post by crazedfox on Mar 10, 2014 23:04:19 GMT -6
tvnacman;
I was referring to the point when a wire-harness has
reached the point of "complete replacement".
That it would be fun to do as I previously stated.
_
|
|
|
|
Post by crazedfox on Mar 10, 2014 4:09:17 GMT -6
I was trying at keeping the case from finishing on splitting into two.
& thought sence I'm fixing it.
Why not try to make it look more appealing & functional in the cooling area.
So I added fake stitches with steel-wire,
Drew a pattern out for cooling, then drilled.
Wrapped some steel-wire on the cooling snorkel,
& Finally brushed parts with a brass brush
to give a little color against the black.
______________________
So if anyone has something they done/had-done to a part/s of there own/freind's scoot post'em here!
_
|
|
|
|
Post by crazedfox on Mar 10, 2014 3:58:30 GMT -6
Hi. Anybody here put a personal Artwise touch on a part/s of your scoot? The artistic side of me sometimes takes advantage of the moment when cleaning/repairing something. & I end up with something fun & sometimes is good too. - Something like this:  -  -  _ |
|
|
|
Post by crazedfox on Mar 10, 2014 2:16:27 GMT -6
Heck, I'd love to take a completed wire modded scoot.
& copy the wire-harness with mods, upgrade to better water-proof connectors, thicker gauge wire, a fuse block,
separate the basic engine-sys & Lighting/Accessory sys. wiring, finishing up into sleek clean wire harness.
In other words, a better, built from scratch, & simplified harnesses.
_
|
|
|
|
Post by crazedfox on Mar 10, 2014 1:47:16 GMT -6
ScrappyDogScooters.com
Chassis/BodyWork button.
Sunny Type 1…
-------------
ScooterPartsExpress.com
Body parts button.
Sunny-Style (1200-100) button…
-
Good-luck!
_
|
|
|
|
Post by crazedfox on Mar 9, 2014 9:26:29 GMT -6
At what place on the crank dose one "measure" the crank, to ensure its the correct size?
-
I want to be sure it's not going to be the wrong stroke length for the P-arm I'd like to put on it.
_
|
|
|
|
Post by crazedfox on Mar 8, 2014 19:20:57 GMT -6
I think Apt. Management might freak-out at the sight of this in my living room. Then ask me "How the heck I got this up to the 2'nd floor?!"  |
|
|
|
Post by crazedfox on Mar 8, 2014 19:00:25 GMT -6
I have a few tools…  The Apt. manager sighed when she first saw this in my dining area. All she asked was; is that attached to the wall?" Me; "No.., would like me to climb it to prove so..? Manager; "no…" _ |
|
