New Student
Currently Offline
Posts: 10
A+'s: 0
Joined: Apr 15, 2014 7:35:21 GMT -6
|
Post by ganeca on Jun 3, 2014 10:36:20 GMT -6
Hi,
yesterday the thermostat of my Jonway 250cc got stuck. I dissasembled it and i am looking for a replacement now. Does anybody know what brand thermostat will fit and what should be the opening degrees. Thank you in advance.
|
|
|
Post by scot on Jun 4, 2014 14:14:50 GMT -6
you can try ebay may have what you need an match the part up to yours,there are also some guys who sell parts hear someone will help soon ,I am not sure of the brand ,you will find it
|
|
|
Post by richardthescooter3 on Jun 5, 2014 11:15:52 GMT -6
Do you have the 257cc Linhai clone or the 244cc Honda clone motor That could make the difference in ordering a thermostat.
|
|
New Student
Currently Offline
Posts: 10
A+'s: 0
Joined: Apr 15, 2014 7:35:21 GMT -6
|
Post by ganeca on Jun 7, 2014 2:58:30 GMT -6
I have the 244 vertical honda clone
|
|
|
Post by ellpee on Jun 7, 2014 8:40:33 GMT -6
|
|
New Student
Currently Offline
Posts: 10
A+'s: 0
Joined: Apr 15, 2014 7:35:21 GMT -6
|
Post by ganeca on Jun 9, 2014 2:20:35 GMT -6
Most vendors do not ship outside of US, or if they do, the shipping cost is 3 times the thermostat. What is the temperature the thermostat starts to open and when it is fully open?
|
|
|
Post by scot on Jun 9, 2014 8:16:48 GMT -6
did you buy it from a dealer wheare they should be able to help ,there are many dealers hear in parts ,an there are some one ebay typeing in thermostat roketa 250 cc came up with 3 different ones 12.00 15.00 temp I will say 160 to 195 ok try finding dealer wear you live wich you did not mention wear you live ,you may have t wait but there should be many Chinese dealers who sell then an ship
|
|
|
Post by richardthescooter3 on Jun 9, 2014 10:44:47 GMT -6
Here is one I found on ebay.
|
|
|
Post by richardthescooter3 on Jun 9, 2014 11:03:34 GMT -6
|
|
New Student
Currently Offline
Posts: 10
A+'s: 0
Joined: Apr 15, 2014 7:35:21 GMT -6
|
Post by ganeca on Jun 10, 2014 11:40:03 GMT -6
Today i bought a new thermostat and mounted it. I noticed that the temp gauge showed one section below the center. I took it for a drive and the sensor showed exact center, but when i leave it to idle i drops one section down. Is this a problem. And one last question. On the thermostat case next to the temp sensor, there is a small hose. What does it do and where does it go. Thank you all for your replies.
|
|
|
Post by alleyoop on Jun 10, 2014 12:35:07 GMT -6
Here you go it goes to your carb: Alleyoop
|
|
New Student
Currently Offline
Posts: 10
A+'s: 0
Joined: Apr 15, 2014 7:35:21 GMT -6
|
Post by ganeca on Jun 11, 2014 0:16:17 GMT -6
Thank you. Mine was clogged.
|
|
New Student
Currently Offline
Posts: 1
A+'s: 0
Joined: Jun 24, 2014 11:13:25 GMT -6
|
Post by javy1323 on Jul 10, 2014 5:40:25 GMT -6
I been working on one of these im having cooling problem also do you have to prime the pump and how do you fill the radiator?
|
|