New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Dec 13, 2012 23:44:33 GMT -6
|
Post by cloudsifter on Sept 15, 2014 16:00:49 GMT -6
JR, alleyoop, I have a 2008 Linhai Aeolus 300 aka linhai 300T I believe as far as parts go and maybe a few other names. I found myself in need of some parts recently and went ahead and contacted the importer- Sunright . I had looked up part numbers for the #1(P/N 41005 $9.19) and #2 Throttle (P/N 41006 $7.54) cable on a yahoo cart somewhere... but went ahead and called Sunright, and they quoted me a price right up. The price turned out to be about 1/2 to 1/3 what I had bought another cable for- but wasn't too sure about as it seemed to be basically a generic X inches throttle cable for 250 and up scooters. The ends weren't exactly like mine, so I nixed installing them. Called the importer, and was given a price for each which at the time last week was about $8-$9 a piece for each. Also ordered a bolt (P/N 10247 M10X1.25X50) for $1.00. The contact info is Sunright International of America , Inc. 1715 Lakes Parkway Lawrenceville, Ga 30043-8923 Tel. 678-546-9997 Fax 678-546-9920. I initially had emailed "Jim" who is the person you usually see mentioned in the forums, but got a reply from someone in charge, that night on their blackberry. Who then fwd my info to their accounting dept, whom I called next day. I read off the part numbers I was interested in, they confirmed the name of the items, and got it out UPS the following day. Received here 4 days later- today. I was using AMEX so there was an additional 3%...and shipping on the parts I mentioned above was $13.48. Unless I missed it somewhere in the forum, already- I've attached the excel spreadsheet with pictures that they sent me when I requested if they had a parts catalog they could email out. No prices on it, but that can change anyway. If the spreadsheet can be of any use... it's attached. EDIT: I TRIED to attach the file, but it's too big at 8.7MB for the forum.Is there a way to do this? If anyone wants it, feel free to msg me and I can email what I have to you. EDIT: JULY 1, 2016 Just emailed that spreadsheet (2 yrs later, to JR) per the email listed here in this thread, but also found the link to the same thing in PDF form Linhai Aeolus Mainstreet 300 Parts Manual
|
|
|
Post by JR on Sept 16, 2014 20:02:56 GMT -6
cloudsifter Email it to me at jrryan@hughes.net and I can put it on here. JR
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: May 22, 2015 6:07:19 GMT -6
|
Post by scotty69 on Jul 1, 2015 3:13:03 GMT -6
I just pulled my sparkplug on my brand new Chinese scooter with zero miles and found it was a used plug. 2014 BMS EFI 260cc.
|
|
|
Post by bobf on Jul 3, 2015 10:38:45 GMT -6
What is wrong with that? I expect every engine to be run, tested, adjusted, and then sold to be installed in something where more running and testing and adjusting takes place.
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: May 22, 2015 6:07:19 GMT -6
|
Post by scotty69 on Jul 3, 2015 16:57:54 GMT -6
Be careful buying a Chinese scooter. Mine had a very used spark plug! Although it's a cheap fix, if makes you wonder what maybe wrong.
|
|
New Student
Currently Offline
Posts: 26
A+'s: 0
Joined: May 22, 2015 6:07:19 GMT -6
|
Post by scotty69 on Jul 3, 2015 17:00:44 GMT -6
What's wrong with that it is a brand new Scooter and this plug was fowled!
|
|
|
Post by ellpee on Jul 4, 2015 6:54:35 GMT -6
Well, as bobf noted, the engine can be run at the factory or distributor for testing and adustment WITHOUT actually putting any miles on the odometer. Some minor fouling would occur in that case, but it shouldn't have been much unless the engine was running way too rich or lean on the test stand.
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Dec 13, 2012 23:44:33 GMT -6
|
Post by cloudsifter on Jul 1, 2016 20:55:53 GMT -6
JR , it's almost 2yrs later, and since I just saw or resaw the post asking me for the spreadsheet.... I have just sent it to your email as posted in the forum. Took me a few min to dig it up in email. So if I previously sent it to you- my apologies... if I had not... well, I'm sorry for taking so long... hadn't been in the forum in a long time. James
|
|
|
Post by JR on Jul 1, 2016 22:10:36 GMT -6
|
|
New Student
Currently Offline
Posts: 7
A+'s: 0
Joined: Dec 13, 2012 23:44:33 GMT -6
|
Post by cloudsifter on Jul 1, 2016 22:22:27 GMT -6
JR You are very welcome. I hope it and or the same thing I emailed you in pdf form can be of use. James aka cloudsifter
|
|
New Student
Currently Offline
Posts: 2
A+'s: 0
Joined: Jul 22, 2012 19:57:12 GMT -6
|
Post by kensworld5 on Apr 19, 2019 13:35:45 GMT -6
greetings. I need a rear axle, bearing, and seal for a 2007 mc-54b-250. where? thanks, ken
|
|
|
Post by cyborg on Apr 24, 2019 8:21:11 GMT -6
Parts for scooters
|
|
New Student
Currently Offline
Posts: 1
A+'s: 0
Joined: Jun 27, 2019 2:06:04 GMT -6
|
Post by sota84 on Jun 27, 2019 2:16:22 GMT -6
|
|
|
Post by cyborg on Jul 1, 2019 8:44:02 GMT -6
Try the library
|
|
New Student
Currently Offline
Posts: 2
A+'s: 0
Joined: Mar 11, 2020 5:54:50 GMT -6
|
Post by alexwithtbx260 on Mar 11, 2020 6:14:51 GMT -6
Hi, I bought a used 2012 BMS TBX260 and my efi fuel pump has went out, I’ve searched high and low and I can not locate a replacement could you PLEASE help in pointing me in the direction to were I can purchase a new fuel pump for my bike.
|
|