New Student
Currently Offline
Posts: 42
A+'s: 0
Joined: Mar 16, 2012 4:36:47 GMT -6
|
Post by dertbikdennis on May 3, 2012 20:11:07 GMT -6
I do get that but I only have 1 yellow that is 15acv the other two are 7acv
|
|
|
|
Post by tvnacman on May 3, 2012 20:35:58 GMT -6
when the regulator is pluged in the ac voltage gets loaded down by the regulator . Like I said the black wire off the regulator disconnect it from the switched power and ground it the charging voltage should go up , just be carefull don't do it for long just enough to get a reading ." Recheck yellow to yellow voltage reved up like 4 or 5 thousand rpm and hold it , it will creap up , you should get 40- 60 vac . " 40 to 60 vac is very very important !!!!
John
|
|
|
|
Post by tvnacman on May 4, 2012 16:26:19 GMT -6
Dennis , I'm waiting to see what you get with the black wire off and reved up , and with the black wire grounded reved up .
I checked the flywheel I'm not getting 11 , I'm going to try to get the iron filings . I will have to ask around .
John
|
|
New Student
Currently Offline
Posts: 42
A+'s: 0
Joined: Mar 16, 2012 4:36:47 GMT -6
|
Post by dertbikdennis on May 4, 2012 18:26:40 GMT -6
I did the test and with the black wire off or grounded and rev'd up it made no difference...... measuring the dcv
looks like I am going to need a new R/R 7 wire
|
|
|
|
Post by justbuggin2 on May 4, 2012 21:12:17 GMT -6
i only counted 8 magnets in the flywheel that i got from you John the same with the org. flywheel and it had an 8 pole stator to start
|
|
New Student
Currently Offline
Posts: 42
A+'s: 0
Joined: Mar 16, 2012 4:36:47 GMT -6
|
Post by dertbikdennis on May 5, 2012 6:50:30 GMT -6
so does a 11 pole flywheel really exsist?  ? |
|
|
|
Post by tvnacman on May 5, 2012 7:00:56 GMT -6
Yes , Just you are correct , Dennis and I had a conversation about this . At the time I sent you yours I was not aware of it I discovered it after . On the plus side of it it is working , I'm working on getting some answers and figuring out a better way to check them . What I explained to Dennis is that I'm unsure of the magnets in the flywheel , However I'm sure it works .
What my plan is , is to get iron filings put paper over the flywheel then sprinkle the filings over the paper , so I can see the magnetic field to get a better count . I ran a piece of ferrious around the flywheel and counted I did it a few times and got different numbers . Feeling and counting and seeing and counting are different . I'm looking for iron fillings I don't know where to get them .
John
|
|
New Student
Currently Offline
Posts: 42
A+'s: 0
Joined: Mar 16, 2012 4:36:47 GMT -6
|
Post by dertbikdennis on May 5, 2012 19:38:09 GMT -6
|
|
|
|
Post by tvnacman on May 5, 2012 19:53:55 GMT -6
Thank you for the link I was looking to get them local , if I cant get them tomorrow or Monday I will order them .
John
|
|
New Student
Currently Offline
Posts: 42
A+'s: 0
Joined: Mar 16, 2012 4:36:47 GMT -6
|
Post by dertbikdennis on May 6, 2012 6:44:21 GMT -6
so heres a thing I was thinking about...what is the ID measurement of the flywheels out there? I know that the one I removed ( 8 pole ) and the one I ordered that was supposed to be 11 pole but has 8 magnets is different .....so what is correct ? even though they both fit over the stator ?
|
|
|
|
Post by justbuggin2 on May 6, 2012 7:30:27 GMT -6
you can get all the iron fileings you want at you local parts store that will turn brake rotors and drums
|
|
|
|
Post by JR on May 6, 2012 7:40:33 GMT -6
|
|
New Student
Currently Offline
Posts: 42
A+'s: 0
Joined: Mar 16, 2012 4:36:47 GMT -6
|
Post by dertbikdennis on May 6, 2012 11:48:11 GMT -6
the stock unit from my 8 pole stator measured 89mm ID I will pull off the new one and measure it
|
|
|
|
Post by tvnacman on May 6, 2012 18:17:18 GMT -6
So it seems like no vendors clain 11 magnets , there is a difference in the od of the 6pole and 11pole stators . I took some pictures with the caliper . I have many parts if your looking for measurments let me know I will be happy to answer any questions . s1214.photobucket.com/albums/cc483/tvnacman/stator/I'm going to send an email about this to the supplier and try to find out if the 11 magnet magneto is in existence . John |
|
New Student
Currently Offline
Posts: 42
A+'s: 0
Joined: Mar 16, 2012 4:36:47 GMT -6
|
Post by dertbikdennis on May 7, 2012 17:19:44 GMT -6
Which flywheel is that you measured ? 11 pole? ( 8 magnet )
|
|
