150cc EFI system update (charging system upgrade) By justbuggin2 (Read 8,568 times)

[justbuggin2]

i have the system laid out on the table hooked everthing together and started looking to see how it will need to be installed. so far the only fab work that i need to do is make a thottle cable mount the one on the thottle body is in the wrong place i am using one off a spare carb and a piece of metal to get it where i want it so i will not need to modify the cable. the feul pump has four ports on it and the instruction leave much to be desired but with a little help from Greg i think i have it ready to go on . I wish i could figure out how to post the pics i am taking any help in that area will be welcome

Attachments:

[tvnacman]

Use photobucket.com

[justbuggin2]

ok i have them loaded to photobucket how do i get them here is the problem i am having

[justbuggin2]

i ndont know what i just did but i got them here

[tvnacman]

Nice job , I don't know anyother way than pbotobucket.
John

[scooterelements]

NICE!!!! I have seen that system many times online. once you install it take pictures of it. Let us know how it runs. Have always wanted to try it out.

[tvnacman]

Just , Tell me how do you connect the ecu to you computer ? bluetooth

have you loaded the program on your pc/laptop ?
what can you see tweek adjust . I just got a vespa 250 with fuel injection I have been looking for a scanner to read codes . What I found is the plug to connect is the same plug for all the vespa's and most of the chinese . If you have any information let me know . Is the cdi a dc cdi controlled via the ecu ?

John

[justbuggin2]

ok i got the bracket made for the thottle cable today and i also got the O2 sensor installed in the pipe this weekend i plan to install it on the bike . i have a usb to serial cable to commuicate with the ecu i have not yet try hooking it up the cdi on the bike now is an ac powered unit the cdi that comes with the system has not got here yet i have already talked with matt and it is suppose to be on the way i will take more pics as i install the system here are some pics of the O2sensor and the bracket that i made for the thottle cable

[alleyoop]

Justbuggin2,
Man your going to ruin that pretty table put something over the table.
That table looks like real wood and they are expensive if you go buy one now a days.
Alleyoop

[justbuggin2]

i got it at goodwill for twenty bucks it is nice but i am not worried about it

[tvnacman]

modernvespa.com/forum/viewtopic.php?p=1321252#1321252

John

[rapidjim]

Interesting link John Thanks

Jim

[tvnacman]

Jim if you look for scanners for the vespa , they use the same plug as some chinese . I was looking to get a scann er for my new to me vespa . Any ideas jim ?

John

[justbuggin2]

got the exhuast back on today ran her to work and back with just a tiny leak i need a new exhaust gasket to take care of it my welding of the bong on was good altough not perty the O2 sensor is tuck up nice and neat i will take some pics tommarow and if the weather is good this weekend i will put the rest of the system on

[imnts2]

thanks for keeping us posted

lefty2