Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on Nov 19, 2015 13:45:09 GMT -6
Hi Kids,
I need new rollers, sliders or pad's what ever their called now days.for my Johway 250bike. I have the older 72mm Honda Helix clone engine, not the Yamaha clone used today. Should I go with standard rollers..? or an upgrade and please explain why. ( and where can I get them..?)
thanks every buddy
barry
|
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on Nov 15, 2015 16:23:30 GMT -6
Hi everybody,
I have a few questions if I may. 1.) Should I upgrade my spark plug, if so what do you recommend..? 2.) My "DASH LIGHTS ARE DEAD", I think something came unplugged. What do I look for..?
thanks you guys...
barry
|
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
YY250T
by: barry - Nov 15, 2015 14:00:47 GMT -6
Post by barry on Nov 15, 2015 14:00:47 GMT -6
Dash lights flickered then died. When I get the front off, what do I do..?
please help.....
|
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on Oct 1, 2015 19:16:39 GMT -6
Thanks eellpee. Not sure how to do that..Is there a video I could watch..?
|
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on Sept 29, 2015 17:39:15 GMT -6
When engine warm's up CVT becomes very jumpy taking off from dead stop. Clutch seems to wait for too high rpm's before engaging. Belt is good and tight.
help
barry
|
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on Jul 30, 2013 17:55:20 GMT -6
New 244cc's have no fuse box anymore.......my 2008 did, my new 2011 doesn't.
|
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on Jul 30, 2013 13:54:09 GMT -6
My YY250T lost all dash lights. I changed to LED a month ago and worked fine for a while then started going off after a few minutes riding now , nothing. Is there a fuse or a main plug I should be looking for..? thanks barry  |
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on Jul 12, 2013 14:07:30 GMT -6
 Thanks, I know you installed then on your trunk. I want them for my brake's but unlike your trunk I have "two brake light bulbs" as on your trike and each with it's own hot and ground. How would I install this or is a different model a better fit..? thanks barry
|
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on Jul 11, 2013 15:33:59 GMT -6
Cool, did you buy and install it yourself..? If so what kind is it, where did you get it and how did you install it..?
barry
|
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on Jul 11, 2013 11:07:33 GMT -6
 Hi Kids.. has anyone added a "Brake Light Flasher" to there scoots..? I have a YY250T with led stop lights and have seen "Flashing Brake Lights" on other scooters. What a great Idea. Really gets peoples attention behind you. Any Ideas what brand or size or amps or what ever It would be..? Is it one used on cars from AutoZone..? thanks you guys barry
|
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on May 13, 2013 15:14:15 GMT -6
Hi again,
The clear plastic around my license Plate Light bulb is burnt and brown. I want to turn it over, the non burnt side but use a cooler but bright LED that shine's down, not straight.
What do you guys use..?
barry
|
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on May 7, 2013 19:23:52 GMT -6
HI Kids,
Still trying to make my front turn signals use LED's, nothing yet. Just like's it's regular bulbs I guess. But I was wondering how many of you backyard techs out there has every looked at your own YY250T flasher unit. They all should be the same. I had a 2008 Roketa and now a 2011 Jonway and there both YY250T. The YY250T are sold under many brands and mostly made the same way at the same place at the same time. So sending me pictures of square or round flashers with flat bottom's and 3 prongs to plug in somewhere. What is this..? Is this what came with your YY250T..?
I don't get it. All I originally asked was how to make LED's work in the front turn signals.
barry
|
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on May 3, 2013 19:50:45 GMT -6
Howdy,
Damn, I'm just full of questions. Where is the RED dash light on my Johnway YY250T..? I removed the front cowling, the windshield and the black cover over the dash instruments. I found two T-10 lights on both ends of the backside of the dash. I changed those to Green and Amber but the RED is still there.
Where did I go wrong (again)..?
barry
|
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on May 3, 2013 1:20:14 GMT -6
![]() [/img]Does anyone know where I can the type of LED Flasher that goes to my bike..? I have a Johway YY250T and MY flasher unit is Round with No Pins sitting in a little rubber ring like a cup holder behind the dashboard with Wires about 6" long ending with a standard White Connector. Does anyone know where I can find this type of LED Flasher..? thanks barry p.s. I have a picture but don't know how to post it. |
|
Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on Apr 30, 2013 19:12:29 GMT -6
Ahh,
For the front turn signals the green ( ground ) wire is tucked down the outer side of the outer side of the socket and the blue (hot) goes through the bottom in the middle of the socket to the contact point. Crimp the hot wire. let the spring return to the top and boom a working front turn signal....except for LED's. The back turn lights can run either with no problem. regular bulbs or LED's. 2 wires. hot and ground. Works with filament bulbs, won't work with LED's. I don't think polarity is a problem here.
So let's recap, amber LED's I ordered have odd placed pins that don't line up with cut outs on the front turn sockets. When pushed hard enough to make contact, nothing happens but filament bulbs work fine. Have gone back to my old factory bulbs....screw it.
|
|
