Brake Lighter Flasher By barry (Read 718 times)

[barry]

Hi Kids.. has anyone added a "Brake Light Flasher" to there scoots..? I have a YY250T with led stop lights and have seen "Flashing Brake Lights" on other scooters. What a great Idea. Really gets peoples attention behind you.
Any Ideas what brand or size or amps or what ever It would be..? Is it one used on cars from AutoZone..?

thanks you guys
barry

[alleyoop]

I have but just on my Trunk Wing Light, It flashs about 6 times or so and then stays on when you squeeze the brakes. You can change the speed of the flashs.
Alleyoop

[barry]

Cool, did you buy and install it yourself..? If so what kind is it, where did you get it and how did you install it..?

barry

[cruiser]

This is the one I bought.

.superbrightleds.com/search/led-products/lsc-100a%20brake%20light%20strobe%20module/" rel="nofollow" target="_blank">.superbrightleds.com/search/led-products/lsc-100a%20brake%20light%20strobe%20module/

I got the LSC-100A. The black wire goes to ground. After cutting the hot wire to the brake lights, one red wire connects to the hot brake light wire and the other connects to the LED brake lights. It's compact (a little larger than a 9 volt battery) and comes with a glue strip to attach to just about anywhere.

[barry]

Thanks, I know you installed then on your trunk. I want them for my brake's but unlike your trunk I have "two brake light bulbs" as on your trike and each with it's own hot and ground. How would I install this or is a different model a better fit..?

thanks
barry

[cruiser]

Hi Barry. If you trace your brake wire back starting from the brake lights, they should tie together into one wire. You make the cut on the single wire and insert the brake modulator there. The ground of the modulator can go anywhere on the frame of the scoot or to one of the brake light grounds.