Sophomore
Currently Offline
Posts: 71
A+'s: 1
Joined: Jul 13, 2011 14:05:42 GMT -6
|
Post by barry on May 7, 2013 19:23:52 GMT -6
HI Kids, Still trying to make my front turn signals use LED's, nothing yet. Just like's it's regular bulbs I guess. But I was wondering how many of you backyard techs out there has every looked at your own YY250T flasher unit. They all should be the same. I had a 2008 Roketa and now a 2011 Jonway and there both YY250T. The YY250T are sold under many brands and mostly made the same way at the same place at the same time. So sending me pictures of square or round flashers with flat bottom's and 3 prongs to plug in somewhere. What is this..? Is this what came with your YY250T..? I don't get it. All I originally asked was how to make LED's work in the front turn signals.
barry
|
|
|
Post by damin69 on May 8, 2013 16:37:48 GMT -6
Well I can tell you they are all basically the same. (They all do the same thing) But they do not all look the same. I was working on my scooter and I had taken mine out of the holder to run a wire or something and for got to put it back. Well it ended up between the frame and triple tree and crushed had to replace. I went and picked up one at Autozone and wired in.
|
|
|
Post by alleyoop on May 8, 2013 18:44:10 GMT -6
Yep, just make sure it is for 12v and check how many connectors is has, they come 2 and 3 connectors. Alleyoop
|
|
Junior
Currently Offline
2008 Roketa MC54B-257 (10,000 Miles) and counting
Posts: 215
A+'s: 1
Joined: Jul 6, 2011 16:47:54 GMT -6
|
Post by bhinch on May 11, 2013 3:41:56 GMT -6
In reply to your prob with the flashers. I believe that it takes a special flasher unit to make the LED's work properly. It is called a no load flasher and I have ordered one off Ebay to correct my LED prob. Mine flash too fast and I have not replaced the front bulbs yet. Maybe when I get the stop and turn to work at the proper rate.
|
|
Junior
Currently Offline
2008 Roketa MC54B-257 (10,000 Miles) and counting
Posts: 215
A+'s: 1
Joined: Jul 6, 2011 16:47:54 GMT -6
|
Post by bhinch on May 11, 2013 3:43:45 GMT -6
I meant just the rear turn. The stop light just activates when I use the brake. oops..
|
|
|
Post by damin69 on May 11, 2013 9:18:55 GMT -6
In reply to your prob with the flashers. I believe that it takes a special flasher unit to make the LED's work properly. It is called a no load flasher and I have ordered one off Ebay to correct my LED prob. Mine flash too fast and I have not replaced the front bulbs yet. Maybe when I get the stop and turn to work at the proper rate. This is the one I used from Autozone
|
|