New Student
Currently Offline
Posts: 5 
A+'s: 0
Joined: Feb 8, 2014 20:52:35 GMT -6
|
Post by james on Apr 19, 2014 23:14:12 GMT -6
I just wanna put in a 61mm cylinder. Would I be able to use a dremel to take a little off without causing any damage? Which bits should I use?
|
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Feb 8, 2014 20:52:35 GMT -6
|
Post by james on Apr 17, 2014 20:36:45 GMT -6
I plan on installing a +4mm crankshaft. Do i need a longer Cam chain?
|
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Feb 8, 2014 20:52:35 GMT -6
|
Post by james on Mar 29, 2014 20:39:51 GMT -6
I have a taotao 150cc scooter. I replaced the stock carburetor because it was sealed and couldn't clean it or modify it at all. So I replace it with a howhit 26mm carburetor 105 main jet. and now my top speed is around 45 mph down from 54 top speed. Gps verified. What could be wrong?
|
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Feb 8, 2014 20:52:35 GMT -6
|
Post by james on Mar 28, 2014 18:40:23 GMT -6
Hi. I plan on upgrading my taotao 150cc scooter for more speed. Here's my setup I plan on using, ncy 61mm head and cylinder, 115 main jet to start with, proformance exhaust, 115 Koso variator and I want to add a bigger Crank. But do i need the spacer that comes with the new crankshaft? And how many more cc's will this bigger Crank give me? Thanks.
|
|
New Student
Currently Offline
Posts: 5
A+'s: 0
Joined: Feb 8, 2014 20:52:35 GMT -6
|
Post by james on Feb 8, 2014 20:58:00 GMT -6
Hi, I'm trying to upgrade my scooter to 61mm and install racing gears. Is there another way of installing the gears without a press? I have a taotao 150cc evo scooter. I'm also install a manual petcock but there's a vacuum hose goin to the manifold and the carburetor I believe it's called the decelerator can i plug this? Thanks
|
|
