Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on May 23, 2014 14:32:45 GMT -6
Got it running. Guess I just needed to clean it more. The filter also had that orange crap in it, so I cleaned that out too.
Thanks, guy!
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on May 23, 2014 12:22:47 GMT -6
Ok. I got it soaking right now. But I noticed more of that orange gas came out when I took it off. I checked the tank and it ran clear like regular gas, check the hoses and stuff, too. I got the petcock soaking too just in case.
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on May 23, 2014 6:30:26 GMT -6
My scooter one day decided not to start. I didn't have time to look at it, so I put it away for the time being. Went out yesterday and tried to start it with no luck. I took the carb out and orange gas came out  I cleaned it and made sure the jets were clear, ect, put it back in and still nothing. I then took the spark plug out andsprayed some carb spray into the hole, put the plug back in and it started and ran until it burned off the carb spray. I made sure the jets were clean and really the whole carb. What next? I didn't really check the float. Maybe it's stuck? |
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 27, 2013 7:51:19 GMT -6
Thanks for the reply, ally. But I was looking more for the actual plastics. I've looked everywhere, and can't seem to find any. Hmm.
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 23, 2013 8:38:48 GMT -6
Has anyone come across any body kits/graphics kits? I see a lot of performance mods, but I haven't seen ANY apperance mods. There's gotta be SOMEthing out there.
Anyone know of a website that sells things like that for the chinese gy6 bikes?
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 11, 2013 13:02:03 GMT -6
Just want to thank you for all you're help, buddy! I'll def be sticking around these forums. I would like to do a big bore sometime soon. Got a lot of hilly terrain around here, and need a little extra to help me get up them. |
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 11, 2013 12:47:38 GMT -6
Now I just gotta put it alllll back together. I hope that's the same problem my other scooter has. Fingers crossed! I have to get a tap and die set so I can fix the male threads on the crank arm so I put that center nut on that holds the flywheel on there.
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 11, 2013 12:44:54 GMT -6
You're never gonna believe it, but unplugging the headlights worked! It still want's to keep revving a little once I let off the throttle, but I'm sure that's because we've been messing with the carb the last few days. |
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 11, 2013 10:03:02 GMT -6
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 11, 2013 0:11:19 GMT -6
Cool I'll add that do my to do list for tomorrow. I'm off tomorrow, so I hope we can get it running right tomorrow  |
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 23:01:04 GMT -6
I'll take some better pictures tomorrow when the sun is out and post them up for you. I'm also gonna spray some carb cleaner around the intake and vacuum lines while it's idling to see if it changes any.
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 21:45:32 GMT -6
I can't find my ad card adapter so I can upload the pics, but when the engine mark lines up with the t on the flywheel, the big hole on the cam sprocket is in the front and the two small holes are on the sides. So the timing is right, I guess.
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 21:30:24 GMT -6
K. Give me a sec
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 21:12:58 GMT -6
If you're too busy to help me, then that's completely fine.
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 21:12:13 GMT -6
What? I never said I looked at it from the outside. I took the flywheel off.
|
|
