Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 21:10:07 GMT -6
They are absolutely the same  |
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 21:03:17 GMT -6
Gotcha. Gonna go check on it right now.
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 20:51:35 GMT -6
Ok, I was checking to see if I had a bad stator on my other scooter, so I took it off and put it on the scooter we're working on now. I got the same symptoms, so I took it off and put the original stator back on the scooter we're working on now. Put everything back together, and now the scooter is doing the same thing as the other.
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 20:47:45 GMT -6
I used the same flywheel, and I just check and the woodruff key is still in there.
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 20:43:24 GMT -6
Would messing with the flywheel get the cam out of whack?
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 20:42:44 GMT -6
How do I check and see if the cam is right? And it's a gy6 engine.
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 20:28:51 GMT -6
Yea, I did, but it's definitely in the slot.
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 20:27:40 GMT -6
I'm thinking, and what if I have to line up the "T" Mark on the flywheel with the mark on the engine so it'll be at top dead center when it starts? That makes sense, right? That way everything oil be in perfect timing?
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 20:18:54 GMT -6
How would the woodruff key have moved? Going to take it off right now  |
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 19:39:31 GMT -6
I'm back and guess what. Nothing changed. I took the jets out of the old carb and put them in the new carb. Still acts the same. I even adjusted the idle and air fuel mix screw |
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 10, 2013 9:25:01 GMT -6
Scrappy Dog Scooter Parts is very reputable. I just ordered a few parts, and they were here 2 days later. They have the best prices too, it seems.
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 9, 2013 20:48:54 GMT -6
Ok. I'll get on that tomorrow. I get off around 7, so I'll get to work on it around that time.
Thanks for all your help, man. I really appreciate it. See ya tomorrow!
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 9, 2013 20:39:22 GMT -6
Should I just suck it up and get a new carb?
|
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 9, 2013 20:38:02 GMT -6
The one that's on there now has stripped screws on the bottom  And the stock carb has sheared screws everywhere, because it's tamper proof :\ |
|
Sophomore
Currently Offline
Posts: 60
A+'s: 0
Joined: Sept 8, 2013 10:26:54 GMT -6
|
Post by aggressor2790 on Sept 9, 2013 20:32:09 GMT -6
Just checked, and they're both around 18mm
|
|
