New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 21:28:11 GMT -6
The carb model has a CDI but not the ones with EFI like mine
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 19:49:17 GMT -6
By being to easy on the throttle the clutch almost engages fully and has just enough to where it can slip . I have seen many do this by trying to be gentle on their scooter by wind up glazing the pads . You can not hurt it by hitting the throttle hard .
Stock springs engage at xx RPMs where the HP one can engage at 1,000 , 1,500 or 2,000 RPMs higher than stock . This is like having a stall convertor in an automatic tranny in a car
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 19:28:22 GMT -6
Saw some that were programmable but not tested one I have the blue finned CDI from PFS on my 2T . My Echarm ignition is controlled by the ECU as it does not have a CDI
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 18:51:45 GMT -6
Did you bring the old one to compare the ends and see if it would fit without being creative ? Did it have a schematic with it or the blinkers ?
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 18:50:00 GMT -6
Are they the blueish white ? Those blind me and glare so much in the rain at night . I do not hav eem but a few friends do on their cars . I have seen 2 cars with bright pink headlights that were noticeable far away but did not blind me . I have retina damage from a plasma arc
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 18:25:05 GMT -6
LEDs use less amps and may flash faster . I put in a red 1157 LED and it looks great but the tag is not as visible . Might try a white LED and compare the diff . White or clear should be brighter behind a colored lens . The 1157 LED screws in like a 1157 bulb no mods required . I will be changing out the running lights and dash lights with LEDs soon
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 17:17:47 GMT -6
Rollers rattle when they get flat spots from wear . I use Dr Pulley sliders in my scooters they not only perform and last longer but are quiet . I thought I had a bad main bearing at first when my rollers started to rattle
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 16:44:02 GMT -6
I know Oreillys has em so does CycleGear.com
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 16:43:22 GMT -6
I had my tail light filament burn out and replaced it with a 1157 LED instead of a bulb
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 16:33:10 GMT -6
Yes that helps too I think Dr Pulley has the largest diameter but may hit the bendix on some
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 16:29:01 GMT -6
Enjoy
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 16:27:03 GMT -6
I had a " secret 63 " and later put on a 50mm or 82cc BBK and had the same top end , but got there faster, faster uphill too . I would top out and I could back off of the throttle and maintain the same speed . I would first try lighter or heavier rollers as there is variables so what may work for one may not for another .
Hope you put on a new belt with a BBK as one should .
Gears is a good idea but may be advanced wrenching for some
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 16:20:54 GMT -6
Motul 710 is great . Only smokes a bit at startup which is a good sign as no smoke can mean no oil . When warm none to almost no smoke . When I used weedeater oil in my pedal mopeds as a young teen it left a com trail
|
|
New Student
Currently Offline
Posts: 14
A+'s: 0
Joined: Apr 28, 2013 16:16:21 GMT -6
|
Post by skuttadawg on Apr 28, 2013 16:19:06 GMT -6
You will need to replace the blinker relay with one for LEDs
|
|
