Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Feb 1, 2018 9:52:17 GMT -6
That’s what I did cyborg........got it from eBay! Now I have to find time to install it, bleed it and reinstall plastics!
|
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Jan 27, 2018 12:12:54 GMT -6
|
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Jan 27, 2018 12:11:30 GMT -6
|
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Jan 15, 2018 15:16:29 GMT -6
Yep did not get a chance to tear the bike down this weekend but should next weekend......I want to be able to see the entire assembly for the check....
|
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Jan 11, 2018 17:32:45 GMT -6
Hey folks......it’s been a while! Happy New Year!
Scoot has been running really well but just lately I am noticing brake fluid on my garage floor from the front wheel. Without tearing down all the plastics on the front end I checked all of the lower end connections and re-bled the from brake caliper. Took it for a nice spin braking a good many times and parked it again in my garage. The next morning brake fluid on the floor. So not sure what’s going on but will tear down the front end plastics this weekend and see what I see. I’m thinking I have a leaking brake line. Where is the best place to find a replacement? Is it best to take the old one off if it is in fact split to measure the length? Would like to hear your opinions as they are always right on! Oh yea......I live in New Orleans so I have to give y’all a Who Dat! Geaux Saints!
|
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Apr 5, 2017 13:11:39 GMT -6
Richard........this hole that I think is missing a plug is not behind the variator cover.......look at the picture again......the fill and drains that you are describing are for the tranny lubricatio and you have to remove the variator cover to get to them......Dave(Burrhead)
|
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Apr 5, 2017 9:14:44 GMT -6
Anybody out there have any idea what this plug that I have missing is for! Is it a place where you add some type of lubricant for the final reduction gears? See photo......  |
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Apr 4, 2017 16:50:22 GMT -6
|
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Apr 4, 2017 11:14:42 GMT -6
Cyborg.........is this where you would pump in grease for the wheel bearing where the plug is that is missing?
|
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Apr 3, 2017 6:19:33 GMT -6
Not yet but does anyone know if I am missing a plug? I will have to remove the variation cover to check gear oil and I will do that too
|
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Apr 2, 2017 15:14:47 GMT -6
When I spin the wheel I get a grinding sound and feel......gotta be wheel bearing! Can anyone recommend the best bearings to use?
|
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Apr 2, 2017 14:38:48 GMT -6
Here's a picture.......looks to me like a plug fell out.......is this where the wheel bearing grease is injected?  |
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Apr 2, 2017 6:06:26 GMT -6
Hey folks.........been a long time! My scooter has been running like a clock but last evening we had issues. About three blocks from the house with both my wife and I on the scoot I started to hear a clacking noise from the rear end. It seems to be coming from the axle/wheel bearing and not from behind the variator housing. With the wife off the bike I was able(driving very slowly)to get it home. I'm just shooting this thread out there just to get some ideas of what type of diagnostics I should do to try and narrow down the problem. My first thought would be to pull the rear wheel first. Any help is greatly appreciated!
|
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Oct 20, 2016 11:14:44 GMT -6
Well as a temporary fix I have used contact cement to affix the backrest/hump back on to the seat. It will work until I figure out something else.......id have to spend $100 on a new factory uncomfortable one!
|
|
Sophomore
Currently Offline
Posts: 99
A+'s: 1
Joined: Apr 22, 2013 13:09:30 GMT -6
|
Post by burrhead on Oct 12, 2016 19:58:01 GMT -6
2011
|
|
