|
|
Post by tvnacman on Aug 26, 2012 12:45:55 GMT -6
Al , can I have a peek at the gears and where you got them ?
John
|
|
|
|
Post by tvnacman on Aug 24, 2012 18:28:53 GMT -6
The starter wants to run away from home.
John
|
|
|
|
Post by tvnacman on Aug 24, 2012 14:39:46 GMT -6
I ordered the speedometer for the BMS pathfinder. I will be installing it in my longbo. . My scooter does not have a tach.
So now it will need to be wired .
John
|
|
|
|
Post by tvnacman on Aug 24, 2012 11:12:35 GMT -6
better yet whats with what will be my new tach . is it a frequency counter ? I don't see how its wired .
|
|
|
|
Post by tvnacman on Aug 23, 2012 23:11:37 GMT -6
did you order the larger sliders yet Al ?
John
|
|
|
|
Post by tvnacman on Aug 23, 2012 17:43:13 GMT -6
change over to leds on every light you can . what is the reading your getting at idle with the headlights on and no fan ? and the same on the hwy . If the fan runs for a very short time like 30 seconds and your cruise and or idle charge voltage is over 13.5 I think you should get by . you could always run the engine without headlights while gearing up , this will recharge your battery from sitting and or starting . Then you get to where your going shut the lights off while you remove your gear .
John
|
|
|
|
Post by tvnacman on Aug 22, 2012 12:38:15 GMT -6
interesting Al !!!!!!!!!!!
John
|
|
|
|
Post by tvnacman on Aug 22, 2012 12:35:48 GMT -6
try a lawn mower shop
|
|
|
|
Post by tvnacman on Aug 21, 2012 19:29:25 GMT -6
use 2 gaskets
|
|
|
|
Post by tvnacman on Aug 21, 2012 18:14:08 GMT -6
|
|
|
|
Politics
by: tvnacman - Aug 21, 2012 12:24:18 GMT -6
Post by tvnacman on Aug 21, 2012 12:24:18 GMT -6
Her mates are having problems lighting there cigars.
John
|
|
|
|
Post by tvnacman on Aug 20, 2012 18:28:28 GMT -6
it was just about that time we learned to dodge the flying shoe !!!
John
|
|
|
|
Post by tvnacman on Aug 19, 2012 8:06:14 GMT -6
Yep, it was me. Ultimately, no OEM rebuild kits are available. I contacted our preferred vendors here, but no dice. I found a seller offering high-quality aftermarket replacement seals and o-rings, but they only worked for the ATV master cylinders. He said that if I sent my old ones to him in the mail, he'd match mine up to his, and send me the correct ones (if he had them,) but I never got around to sending him my old set. I can give you his contact info if you'd like to explore that option. would you have the glass for the master cylinders or know who does ? John At the end of the day, I ordered a whole new system from this guy: .ebay.com/itm/Front-Hydraulic-Brake-Lever-Assembly-for-150cc-250cc-Gas-Scooters-Moped-GY6-Part-/180764762573?pt=Motorcycles_Parts_Accessories&hash=item2a166b61cd&vxp=mtr" rel="nofollow" target="_blank"> .ebay.com/itm/Front-Hydraulic-Brake-Lever-Assembly-for-150cc-250cc-Gas-Scooters-Moped-GY6-Part-/180764762573?pt=Motorcycles_Parts_Accessories&hash=item2a166b61cd&vxp=mtrThat's a front lever, but he sells the rear as well. Came with master cylinder, hose line, caliper and new brake pads. I simply disconnected the new master cylinder from the system, bolted it up to mine, bled it, and bingo. |
|
|
|
2007jcl250
by: tvnacman - Aug 17, 2012 4:06:31 GMT -6
Post by tvnacman on Aug 17, 2012 4:06:31 GMT -6
check 21 and 22 . there are bushings inside 23 that could be worn .
John
|
|
|
|
Post by tvnacman on Aug 17, 2012 4:01:19 GMT -6
That hurts , look on the bright side . You have the scooter and you know no one got hurt . I would be thankfull !!!
John
|
|
