Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 16:51:15 GMT -6
it's the roketa 257cc LINHAI Horizontial motor....So,if I pull off the cover thats behind the clutch,will all the gears fall out?? I just don't want a mess......So,you have no idea where to get the gears or bearings??
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 16:52:36 GMT -6
well,let me go pull the cover off....Give me about 15 mins....
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 16:54:07 GMT -6
should I have to remove the back tire,before removing the cover??
|
|
|
|
Post by richardthescooter3 on Jul 7, 2014 17:03:35 GMT -6
Hi rcq78, You shouldn't have to take tire off.
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 17:10:35 GMT -6
ok,removed the tranny cover & pulled all the gears & check out all the bearings & everything looks good,bearings seem to turn very easy & all gear teeth look excellent....i'm wondering if it's the bearing that is on the bracket that the brakes & muffler are mounted on.... or the bearing just behind the wheel...
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 17:27:48 GMT -6
Ok,on further inspection,it seems like it could be the bearing in the cover that the shaft that the clutch goes onto....There looks to be a plastic cover over it looking at the outside of the cover....When spinning the shaft it don't turn smooth,there is a small grinding noise,which could be multiplied when you apply increased rpm to it...There is a bearing just inside the cover on the same shaft,that seems to be good,it's the one the is pressed into the cover that has a little noise when truning it by hand....
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 17:45:26 GMT -6
ok,I'm downloading another video of the area where I think the noise is coming from......Let me know what you think......
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 18:11:53 GMT -6
Ok,alley,Tell me what you think...At higher rpm's I think this could be the problem.... tinypic.com/player.php?v=2i9h5sj%3E&s=8#.U7s2JrEzRPAlso,is it ok,to start the scoot with the variator & clutch off??? Now if this bearing is the problem,how do I get it out of the cover?? Is it pressed in?? Or is it just that plastic sleeve making the noise... |
|
|
|
Post by alleyoop on Jul 7, 2014 18:18:16 GMT -6
|
|
|
|
Post by alleyoop on Jul 7, 2014 18:19:25 GMT -6
That sounds like it bud, Good find
Alleyoop
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 18:21:24 GMT -6
alley,the trans is pretty straight forward,I thought it would a mess it's not as bad as I thought to mess with...Now,finding the problem....I think it could be that bearing in that video....
|
|
Junior
Currently Offline
Posts: 105
A+'s: 1
Joined: Apr 28, 2012 7:22:16 GMT -6
|
Post by rcq78 on Jul 7, 2014 18:23:49 GMT -6
So,now how do I get it out of there??? And where do I get the parts...Bearing & gasket...
|
|
|
|
Post by alleyoop on Jul 7, 2014 18:24:11 GMT -6
I think your right and with a load on it and getting hot it would make more noise.
|
|
|
|
Post by alleyoop on Jul 7, 2014 18:25:47 GMT -6
The Video is pretty crappy just take a picture of the part I think you have to take Pound the Shaft out, that is the Shaft that the CLUTCH goes on right?
Alleyoop
|
|
|
|
Post by alleyoop on Jul 7, 2014 18:28:30 GMT -6
If it the shaft that the CLUTCH fits on here is one for a smaller scoot but they are all the same except some have more bearings than others:
Alleyoop
|
|
..BAD TO THE BONE..