New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: Jan 4, 2013 13:20:22 GMT -6
|
Post by uckel on Nov 20, 2013 18:34:26 GMT -6
I came here last time I needed this part .. but I can't find any records of the topic .. I don't know why I am going thru these at 1 every 6 months but I have lost headlights and rear running light for the third time.. attaching a pic .. any help finding this part to order is greatly appreciated 5 wires .. 4 in the connector and 1 loose  Thank you for your help |
|
|
|
Post by fflintstone on Nov 20, 2013 18:40:27 GMT -6
Hey uckel,someone will be on soon that knows what you need--I don't know but alleyoop or JR or some others will--btw--which scooter is it you need the part for? Just in case they ask,it will speed up the info--good luck,fflintstone
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: Jan 4, 2013 13:20:22 GMT -6
|
Post by uckel on Nov 20, 2013 18:45:45 GMT -6
I have conversed with both of them in the past .. they have always been good help ..
The Scooter is a Dongfang DF150STD but the R/R is identical to the Ruckus if memory serves me right
|
|
|
|
Post by tvnacman on Nov 20, 2013 19:38:50 GMT -6
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: Jan 4, 2013 13:20:22 GMT -6
|
Post by uckel on Nov 20, 2013 20:22:12 GMT -6
Thank you! .. I have ordered 2 .. anxiously awaiting them . will keep you updated
|
|
|
|
Post by ellpee on Nov 21, 2013 9:35:50 GMT -6
For the benefit of the general student population, any of you gurus have any idea why he would be burning through regulators at that rate?
|
|
|
|
Post by tvnacman on Nov 21, 2013 12:01:26 GMT -6
I would explore ground load or absent of load.
John
|
|
|
|
Post by alleyoop on Nov 21, 2013 13:07:04 GMT -6
Also where it is mounted may be to close something giving off a lot of heat.
Alleyoop
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: Jan 4, 2013 13:20:22 GMT -6
|
Post by uckel on Nov 21, 2013 15:17:53 GMT -6
It is mounted up under the front end so there is no generated heat near by .. and I would love to know how to check for ground problems .. I have sanded the frame where the R/R mounts and explored the entire wire harness to make sure its not pinched anywhere against the frame.. though I have not unwrapped the harness to check for internal mistakes ...
|
|
|
|
Post by tvnacman on Nov 21, 2013 15:29:39 GMT -6
What is this regulator in , what type vehical ?
I have not had a request for that style refulator in the past .
John
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: Jan 4, 2013 13:20:22 GMT -6
|
Post by uckel on Nov 21, 2013 15:43:07 GMT -6
|
|
|
|
Post by tvnacman on Nov 21, 2013 15:48:10 GMT -6
Can you take a picture of the stator plug .
John
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: Jan 4, 2013 13:20:22 GMT -6
|
Post by uckel on Nov 21, 2013 15:49:33 GMT -6
I can .. will be just a few mins ...  apologies on delay .. battery is under the seat and had to remove it and the bucket/etc .. terrible design |
|
|
|
Post by tvnacman on Nov 21, 2013 16:22:33 GMT -6
You could use a basic 4 pin regulator . Tell me about you headlights ac or dc ?
John
|
|
New Student
Currently Offline
Posts: 46
A+'s: 0
Joined: Jan 4, 2013 13:20:22 GMT -6
|
Post by uckel on Nov 21, 2013 16:31:18 GMT -6
12DC bulbs 35w .. but they only run when the scooter is running .. my best guess is they are on the DC side of the system but idk..
Anyway I can confirm this?
|
|
..BAD TO THE BONE..
