|
|
Post by alleyoop on Feb 5, 2013 12:15:46 GMT -6
You really do not need a ring expander you can open them with your hands enough to slip around the piston and slide them into the groves. Just open them just enough to go on the piston.
Alleyoop
|
|
New Student
Currently Offline
Posts: 36
A+'s: 0
Joined: Jan 13, 2013 22:17:18 GMT -6
|
Post by danso on Feb 5, 2013 12:46:49 GMT -6
Thank You! I`m going to get new rings and Gaskets and try to get it back together. Probably won`t have them for a couple days so will post again when I have the parts. Thx again!
|
|
New Student
Currently Offline
Posts: 36
A+'s: 0
Joined: Jan 13, 2013 22:17:18 GMT -6
|
Post by danso on Feb 6, 2013 16:51:51 GMT -6
I have a picture of the valves and they appear a little burnt, but I don`t know how to post the picture here. I can copy it but it won`t let me paste it here. Any ideas?
|
|
|
|
Post by alleyoop on Feb 6, 2013 17:16:17 GMT -6
Email them to me and I will put them up for you Check your PM for my email I don't want the world to be emailing me(HAHA).
Alleyoop
|
|
New Student
Currently Offline
Posts: 36
A+'s: 0
Joined: Jan 13, 2013 22:17:18 GMT -6
|
Post by danso on Feb 6, 2013 18:31:36 GMT -6
My Daughter just came over and I think she sent it to you from my phone.
|
|
|
|
Post by alleyoop on Feb 6, 2013 18:46:52 GMT -6
Nothing yet, maybe she can load them onto your computer or just on your desktop and then right click and select SEND TO it then will pop it up on an email and you just put in my email address.
Alleyoop
|
|
New Student
Currently Offline
Posts: 36
A+'s: 0
Joined: Jan 13, 2013 22:17:18 GMT -6
|
Post by danso on Feb 6, 2013 19:08:20 GMT -6
I`ll try!
|
|
New Student
Currently Offline
Posts: 36
A+'s: 0
Joined: Jan 13, 2013 22:17:18 GMT -6
|
Post by danso on Feb 6, 2013 19:36:05 GMT -6
It`s coming.
|
|
|
|
Post by alleyoop on Feb 6, 2013 20:04:01 GMT -6
How did you send it THROUGH CHINA and BOAT(HAHA),
STILL NADA
Alleyoop
|
|
|
|
Post by alleyoop on Feb 6, 2013 20:05:05 GMT -6
Never mind I JUST GOT IT(HEHE).
Alleyoop
|
|
|
|
Post by alleyoop on Feb 6, 2013 20:15:28 GMT -6
Here it is, they sure do not looke good, you can either get a new complete head or clean them up and lap them or get new valves and lap them. Alleyoop  |
|
New Student
Currently Offline
Posts: 36
A+'s: 0
Joined: Jan 13, 2013 22:17:18 GMT -6
|
Post by danso on Feb 6, 2013 20:20:11 GMT -6
Clean em up and lap them is all i can affotd right now. Still waiting on the rings and gaskets. More later
|
|
|
|
Post by alleyoop on Feb 6, 2013 20:31:12 GMT -6
Cool give it a shot I can see build up under the valve on the seat.
Alleyoop
|
|
New Student
Currently Offline
Posts: 36
A+'s: 0
Joined: Jan 13, 2013 22:17:18 GMT -6
|
Post by danso on Feb 16, 2013 18:37:16 GMT -6
OK I got the parts and replaced the piston and rings. I gaped the rings at .004 or as close to that as i could get, put everything back together and was real proud of myself for a while. Put it back in the Scooter and it won`t start. Is there a trick to getting them started after doing the work I did? I tried putting gas in the breather tube on the carb to no avail. Oh I replaced the coil while i was at it. How do i make it run?
|
|
New Student
Currently Offline
Posts: 36
A+'s: 0
Joined: Jan 13, 2013 22:17:18 GMT -6
|
Post by danso on Feb 17, 2013 1:18:41 GMT -6
As I was cleaning up after I put the motor back in the scoot I found 3 three of the guides in the corner. Don`t know from where they came but are they important to put back in? Feel pretty stupid now!
|
|
..BAD TO THE BONE..
