New Student
Currently Offline
Posts: 33
A+'s: 0
Joined: Sept 17, 2012 16:58:32 GMT -6
|
Post by dean7 on Jan 30, 2013 13:49:36 GMT -6
had the same problem with a scrappy dog regulator and more problems beside those which are on another board scrappyis the parts go somewhere else
|
|
New Student
Currently Offline
Posts: 33
A+'s: 0
Joined: Sept 17, 2012 16:58:32 GMT -6
|
Post by dean7 on Jan 30, 2013 13:44:45 GMT -6
this is something i have waited for for a while could if jr look at my post at his convenience and give me his valued opinion I would be grateful and I have a trick I learned about wiring diagrams and old eyes when printing on windows 7 goes to poster and at it 200%it will print alarge poster over 6 pages cut on the printed marks scotch tape and no need for glasses also if you want diagrams of just about any thing go to the patent office website
|
|
New Student
Currently Offline
Posts: 33
A+'s: 0
Joined: Sept 17, 2012 16:58:32 GMT -6
|
Post by dean7 on Jan 30, 2013 13:27:21 GMT -6
if the rear tire is to low it will slow your scooter down noticeably
|
|
New Student
Currently Offline
Posts: 33
A+'s: 0
Joined: Sept 17, 2012 16:58:32 GMT -6
|
Post by dean7 on Jan 30, 2013 13:23:29 GMT -6
is this a 150 sounds like starter clutch to me been there a couple of times
|
|
New Student
Currently Offline
Posts: 33
A+'s: 0
Joined: Sept 17, 2012 16:58:32 GMT -6
|
Post by dean7 on Jan 30, 2013 13:04:42 GMT -6
watch out for scrappy dog they will let you order parts that they don't have and then you will not get them i have been waiting over 6 mos for a floor mat and 2or3 for a kickstarter i was going to order an wiring harness but i.ve learnt to call first to me this is sorry business
|
|
New Student
Currently Offline
Posts: 33
A+'s: 0
Joined: Sept 17, 2012 16:58:32 GMT -6
|
Post by dean7 on Jan 30, 2013 10:59:27 GMT -6
hello everyone I want to run something by you I had to buy a new wiring harness because my cdi connectors crumbled the new harness has an 6 plug connector I can'find a diagram for this setup. but the strange part is the yellow wire seems to run from the stator to the regulator with no taps any where checked with ohmmeter my p lan is to tap into it and jump them to the 2 extra wires which are brwn/blk and gray and go into the right connector but i really don't understand that about the yellow wire is this harness wrong how would that possiby do any thing? the gray goes to taillights and another connector brwn/blk stays up front to another connector it is a 150
|
|
New Student
Currently Offline
Posts: 33
A+'s: 0
Joined: Sept 17, 2012 16:58:32 GMT -6
|
Post by dean7 on Nov 16, 2012 18:10:15 GMT -6
i checked mine by taking it off and hooking it to the battery a couple of minutes longer and it grew (worked)
|
|
New Student
Currently Offline
Posts: 33
A+'s: 0
Joined: Sept 17, 2012 16:58:32 GMT -6
|
Post by dean7 on Nov 16, 2012 18:05:02 GMT -6
i dont know if it will help but i put anew stator on and blew all my lights and next i found the wires ging to the headlight bulbs right at the headlight connection it goes thru metal 1 wire went thru a plastic tube and 1 wasn't in the tube and had shorted out which i supposed byppassed the regulater once fixed the same regulater worked fine
|
|
New Student
Currently Offline
Posts: 33
A+'s: 0
Joined: Sept 17, 2012 16:58:32 GMT -6
|
Post by dean7 on Nov 16, 2012 17:51:10 GMT -6
i got mine out with a regular bit by giong to the other side wen the bit hit the bolt it came right out
|
|
New Student
Currently Offline
Posts: 33
A+'s: 0
Joined: Sept 17, 2012 16:58:32 GMT -6
|
Post by dean7 on Sept 17, 2012 18:11:58 GMT -6
got 7 pin rectifier?
|
|
