|
|
Post by snechovski on Jun 18, 2014 15:29:41 GMT -6
The scoot is turning over just no fire
Sent from my SM-N900V using Tapatalk
|
|
|
|
Post by snechovski on Jun 18, 2014 9:56:57 GMT -6
I'm starting to think the rectifier is bad because, before I bought it the guy that had it before me was running it on a dead battery he just kept jump starting it. Is this a possibility?
Sent from my SM-N900V using Tapatalk
|
|
|
|
Post by snechovski on Jun 18, 2014 9:55:10 GMT -6
Yea Richard I checked it first. Thanks for replying
Sent from my SM-N900V using Tapatalk
|
|
|
|
Post by snechovski on Jun 18, 2014 9:16:51 GMT -6
Trust me, switch is on and nothing is unplugged. I've even pushed with a pick all the wires in every plug from front to rear and they all have contact.
Sent from my SM-N900V using Tapatalk
|
|
|
|
Post by snechovski on Jun 17, 2014 13:29:52 GMT -6
Ok, I replaced the plug, cdi box, and coil and still no fire... On my coil there's a hot side when the key is on and a ground. On the ground side when I turn the key on it loses ground. Is that supposed to be like that?
Sent from my SM-N900V using Tapatalk
|
|
|
|
No fire
by: snechovski - Jun 14, 2014 7:57:35 GMT -6
via mobile
Post by snechovski on Jun 14, 2014 7:57:35 GMT -6
I've checked every wire, it's all connected. I'm going to start with a spark plug first and then I guess start checking for voltage. I'm just baffled that all I done was clean the carb and now no spark. I've changed a hundred of them and I've never had this.
|
|
|
|
No fire
by: snechovski - Jun 13, 2014 19:34:40 GMT -6
via mobile
Post by snechovski on Jun 13, 2014 19:34:40 GMT -6
Enricher
|
|
|
|
No fire
by: snechovski - Jun 13, 2014 19:34:17 GMT -6
via mobile
Post by snechovski on Jun 13, 2014 19:34:17 GMT -6
Where is the enriched?
|
|
|
|
No fire
by: snechovski - Jun 13, 2014 18:52:08 GMT -6
via mobile
Post by snechovski on Jun 13, 2014 18:52:08 GMT -6
Thanks for responding, yes I tried grounding on motor also. AND I'm not sure if ac or DC but could a bad plug cause no fire? And why did it happen when I put the carb back on? It was running Ok before that I was just cleaning carb.
|
|
|
|
No fire
by: snechovski - Jun 13, 2014 18:02:10 GMT -6
via mobile
Post by snechovski on Jun 13, 2014 18:02:10 GMT -6
Well with plug out grounded to the frame there's no fire. And I've cranked it for a long time.
|
|
|
|
No fire
by: snechovski - Jun 13, 2014 17:19:17 GMT -6
via mobile
Post by snechovski on Jun 13, 2014 17:19:17 GMT -6
Hi everyone I'm new on here today. Well I have a vog 260 and I took my carb off too clean it and reinstalled it and would not start. I noticed the plug wire was off when I was trying to start it so I put it back on and still no fire. checked every wire to see if I bumped something and all is plugged in. Please help
|
|
