New Student
Currently Offline
Posts: 9 
A+'s: 0
Joined: Mar 20, 2014 14:36:50 GMT -6
|
Post by scullymcgee on May 5, 2014 19:01:40 GMT -6
Can u clarify hype performance? Is there a better cdi to get?
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Mar 20, 2014 14:36:50 GMT -6
|
Post by scullymcgee on May 5, 2014 15:20:49 GMT -6
Top end speed is fine... Im 280 and itll go 55-60... Get up and go would be nice...just basic city streets. Heres the cdi i bought :  |
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Mar 20, 2014 14:36:50 GMT -6
|
Post by scullymcgee on May 5, 2014 8:30:16 GMT -6
Mild upgrades... A little better performance, ive seen that some upgrades are good to make just because of inferior parts, but ive already ordered new performance cdi coil and spark... Ive seen some talk on replacing airfilter.".but really looking for simple improvements than can be made without having to take apart the engine..mostly "plug n play" type of improvements
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Mar 20, 2014 14:36:50 GMT -6
|
Post by scullymcgee on May 4, 2014 13:15:39 GMT -6
Thanks!
any suggestion on brighter than stock bulbs for the headlghts?
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Mar 20, 2014 14:36:50 GMT -6
|
Post by scullymcgee on May 3, 2014 21:32:30 GMT -6
Looking to do upgrades on my scooter 150cc mc13-150.
what are some simple recommended upgrades to make? Already working on LED upgrades..
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Mar 20, 2014 14:36:50 GMT -6
|
Post by scullymcgee on May 3, 2014 20:03:14 GMT -6
My headlights have 2 bulbs each a large bulb and a smaller bulb...what are the part numbers for these?
also my headlights light up as such: low beam; two smaller bulbs and left big bulb...on hi beam/passing..all bulbs....is this right?
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Mar 20, 2014 14:36:50 GMT -6
|
Post by scullymcgee on May 2, 2014 13:53:11 GMT -6
I got a goldmotto radio off of ebay for my scooter. Anyone have one that has any recommendations or experience with them... Im looking for the wiring diagram so that i can wire it to my mc13-150 scooter
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Mar 20, 2014 14:36:50 GMT -6
|
Post by scullymcgee on May 2, 2014 13:51:15 GMT -6
Looking to replace/ upgrade my bulbs on my mc13-150. Is there a list of what the bulb numbers are for each bulb so i can find the led replacement for eqch bulb?
also, does anybody have recommendations that has done this before.
also any recommendations for the headlight bulbs would be appreciated.
|
|
New Student
Currently Offline
Posts: 9
A+'s: 0
Joined: Mar 20, 2014 14:36:50 GMT -6
|
Post by scullymcgee on Mar 20, 2014 14:49:35 GMT -6
Recently bought scooter, kick start works and it runs good. Push button start wont work, no brake lights when brake handle squeezed, no power going to push button switch but switch itself tested good. Fuse at batterry good But former owner had the battery fuse bypassed and had it taped directly to the battery. Has new ignition, ignition turns on fine, headlights and blinkers work. Just no push start or brake lights
|
|
