New Student
Currently Offline
Posts: 31 
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Sept 15, 2017 7:22:47 GMT -6
Thank you for the reply Sorry for grammar but I'm using google translator .... I do not understand why, having removed the key, the engine was trying to start alone. Could it be a fake electrical contact? The noise I felt resembled the fan like a buzz was not the radiator fan. However usually when the radiator fan rotates if I turn off the bike, the fan also turn off.  Hello |
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Sept 14, 2017 2:49:13 GMT -6
I have a jonway 250 scooter, a strange thing happened, while I was driving I heard a fan like a fan, then when I stopped I turned off the engine and took off the key, but the starter continued to run until it was probably discharged the battery has definitely switched off. After about an hour I tried to turn it on again and it worked properly, what could happen?
Thank you
Hello
|
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Jun 12, 2016 22:29:13 GMT -6
Hello, I changed the oil in my scooter , but now I see the oil leaks on the ground . the metal seal was to be replaced with a new one ?
thanks bye.
|
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Apr 22, 2016 8:44:53 GMT -6
Thanks for information!!!!
Bye
|
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on May 8, 2015 3:16:39 GMT -6
What is the current consumption when the scooter is turned off? If I do not rip your battery is discharged after a few days.
Thanks
Bye
|
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Apr 21, 2015 5:08:55 GMT -6
Hello, I would like to change the engine oil to my scooter, is a difficult thing? Is there a tutorial?
thanks
bye
|
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Sept 24, 2014 7:04:12 GMT -6
My jonway y250tt is the 2008.
Thanks
|
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Sept 23, 2014 3:49:30 GMT -6
Hello, when I move the scooter without braking feel an annoying whistle - squeak coming from the disc brakes, is this normal?
The scooter has 7000 Km.
thanks
|
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Sept 23, 2014 1:20:56 GMT -6
I have a scooter Jonway Roketa yy250t similar to.
The fuel gauge is not very reliable and I do not have the manual scooter, can you tell me how much gas contains the tank and how many miles the scooter along with a liter of petrol?
Thanks
By
|
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Mar 25, 2014 7:47:46 GMT -6
Thanks for reply
|
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Mar 24, 2014 8:09:14 GMT -6
Update .. I have not found the small brass collar, so I'm thinking of using an electric clamp the take off the plastic cover and use the terminal as if it were the small brass collar. imageshack.com/a/img580/997/wdh4.jpgimageshack.com/a/img838/9450/h54d.jpgOne other question, the rubber seal between the tank and the probe is to be replaced, it seems a bit squashed, I can replace it with a gasket for water pipes or gasoline may damage it? Thanks Bye |
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Mar 19, 2014 23:29:35 GMT -6
|
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Mar 19, 2014 14:44:54 GMT -6
I tested the connections and now something happens, if I press the probe then the meter starts to level the score correctly, I saw in another thread that you have changed the probe as in the picture but I do not understand how and what has been done. imageshack.com/a/img811/1803/paiw.jpgThere is a picture where you can see better the change? Thanks at all |
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Mar 18, 2014 23:21:18 GMT -6
I did another test, I unscrewed the screws behind the meter and I measured the resistance with the multimeter between the wire white/ blue and the wire white/yellow. By placing the probe in place full I measure 600 ohms then continuing to move it to the empty position midway becomes about 400 ohms when in position empty again I measure 600 ohms, it is strange?
An answers, the black wire is the power of the instrument (12V)?
ThANKS
|
|
New Student
Currently Offline
Posts: 31
A+'s: 0
Joined: Jan 21, 2014 5:25:54 GMT -6
|
Post by miky6719 on Mar 17, 2014 23:28:19 GMT -6
Hello, in the wafer level sensor there are three electrical contacts that correspond to the wires, the middle think it is in fact the mass is at 0 volts the other two are at 12 volts when it is empty. When I move the float position in full, the tensions in the left contact becomes 4.9 volts, and the contact to the right becomes 2.46 volts, in the picture you can see where touch with the tip of the meter.
thanks
|
|
