New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on May 4, 2012 13:45:42 GMT -6
My bike is a Roketa 250 54b Yamaha clone. The Honda spring look t5he same ? Do u know if they are ? Thanks ALLEYOOP
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on May 4, 2012 12:03:17 GMT -6
Where can i buy the springs? I have not been able to find anything but 2000 rpm springs. Thanks Paul
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on May 4, 2012 11:07:36 GMT -6
Thanks !!! I'll try the new springs. Paul
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on May 3, 2012 18:05:12 GMT -6
ALLEYOOP the clutch starts to pull at 2400 rpm when u first ride it. After 10 to 15 miles it starts trying to pull at 2100. That is when it begins to shake. U can feel it catch and slip and catch again? Thanks Paul
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on May 2, 2012 22:39:42 GMT -6
Thanks ALlEYOOP!! I will check rpms and get back. I may have to change to performance clutch.
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on May 2, 2012 2:18:44 GMT -6
HI !! I pulled it apart and cleaned clutch. I took the glaze off. It lasted about 250 miles and is starting back to doing the same thing. I hope i will have time this next week to go back in and go through it all. I'm going to try the roach powder JR talked about. One thing strange about it first time u ride each day for about 4 04 5 miles it does not shake as bad. After a while it shakes the trunk on the back pretty bad. I had a brake lock up on my truck and it got the drum real hot. I cleaned up the brake shoes and put it back together. It was ok for about 4 or 500 miles then it did almost the same thing as the scooter does when u used the brakes. I had the drum turned and the problem went a way. I let u know what i do and if it worked. Thanks for all the help from everyone!!!!!!!!!!!
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on Apr 28, 2012 13:25:48 GMT -6
my 54b lost power and i adjusted the valves . no trouble since. i have put 1500 miles on it and it is starting to idle wrong on cold crank up. i think i need to adjust them again.
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on Apr 27, 2012 18:32:14 GMT -6
JR how do u apply the ant and roach powder on the clutch? Thanks Paul
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on Apr 23, 2012 18:49:30 GMT -6
There is 1400 miles on since new gates belt and new weight.
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on Apr 23, 2012 1:53:52 GMT -6
Hi JR!! I cleaned all grease and anything foreign out when i put the weights in. Thanks Paul
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on Apr 22, 2012 1:51:45 GMT -6
thanks for the reply. my springs look new. my clutch looked new. i weigh 300lbs . that may have something to do with my clutch or drive train problems? i do a lot of stop and start. i use it to save money running for parts. thanks fairweasel2323
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on Apr 21, 2012 5:44:23 GMT -6
Thanks Cruiser!! I'll try that out. Have a nice weekend!!
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on Apr 20, 2012 19:23:06 GMT -6
sorry !! was not yelling. didn't mean to o fend.i do it because i don't see or type well. it made it easier on me. thanks alleyoop. also thanks JR!!!
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on Apr 20, 2012 17:30:50 GMT -6
THE 250 IS A LINHIA. THE BIKE HAS 3100 MILES ON IT. IT HAS 1400 ON IT SINCE NEW GATES BELT. IT HAS BEEN SHACKING FOR ABOUT 1000 MILES. I WILL TRY THE ROACH SPRAY ON THE CLUTCH. THE BELT LOOKED GOOD WHEN I HAD IT OFF LAST WEEK. I WILL SET THE VALVES AGAIN. I SET THEM ABOUT 1400 MILES AGO. THANKS GUYS!!! THE SCOOTER IS AN O9. I THOUGHT ALL ROKETA 250 54 B,S HAD THE LINHIA IN THEM? THE WEIGHTS ARE DOC PULLEY 13G
|
|
New Student
Currently Offline
Posts: 36
A+'s: 1
Joined: Aug 29, 2011 10:57:51 GMT -6
|
Post by paulpaul on Apr 20, 2012 13:06:24 GMT -6
HELLO EVERYONE!! I.M HAVING TROUBLE WITH A SHAKING ON TAKE OFF. I TOOK THE CLUTCH OUT AND SANDED THE CLUTCH HUB AND CLEANED. I SANDED THE CLUTCH FIBER AND CLEANED. I CLEANED AND SANDED LIGHTLY THE PLACES THE BELT RUNS. I PUT IT BACK TOGETHER . FOR 200 TO 25O MILES IT WAS SMOOTH AS SILK. NOW IT'S DOING THE SAME THING. I REBUILT THE VARATOR NOT LONE AGO AND PUT NEW WEIGHTS IN IT.
ALSO THE SCOOTER CRANKS GOOD THE FIRST TIME EACH DAY, BUT WHILE RUNNING IT WILL START TO RUN SLOW. SOMETIMES IT WILL DIE. IF IT DOESN'T DIE LET IT RUN AND IN A LITTLE WHILE IT WILL GO TO THE CORRECT RPM AND RUN FINE. IF U DON'T WAIT FOR THE WARM UP .IT WILL DIE AT YOU FIRST STOP. I LIVE IN FLORIDA SO IT NEVER GETS COLD THANKS ANY HELP WILL BE APPRECIATED!!!!!!!!!!!!!!!!!
|
|
