New Student
Currently Offline
Posts: 37
A+'s: 0
Joined: Nov 2, 2013 3:12:41 GMT -6
|
Post by 1pkryan on Nov 11, 2013 8:57:55 GMT -6
I think it does, this bike was stolen recovered and has no electrical stuff like lights/indicators ect.. Also appears to be hot-wired, with a 2-way split wire coming from the left handlebar, 1 side connected to a green wire other side connected to a black/white wire.
Note: The red and the black wire what the ignition barrel is connected to are disconnected by the way.
This could be the problem from the start, but i just assumed they had it running with this setup originally.
Yes i tried another spark plug from a working bike. Still no spark.
EDIT1 -------------------------------------
Right there is 2 wires coming from left handlebar, 1 side connects to where the ignition switch plugs into which is a green wire, the red wire and the black wire from where the ignition plugs into are currently disconnected, and are not connected to nothing. The other wire coming from the left handlebar connects to a black and white wire, think this might connect to the CDI unit? but i'm not sure. Thanks.
EDIT2 -------------------------------------
red/black wire reading is 0. Need a new R/R?
If yes, can u still tell me about the wiring, with the ignition. Thanks.
|
|
New Student
Currently Offline
Posts: 37
A+'s: 0
Joined: Nov 2, 2013 3:12:41 GMT -6
|
Post by 1pkryan on Nov 11, 2013 5:45:40 GMT -6
Okay so i've checked the voltage and it seems fine. I brought another CDI, still no spark. Not sure where to go from here.
|
|
New Student
Currently Offline
Posts: 37
A+'s: 0
Joined: Nov 2, 2013 3:12:41 GMT -6
|
Post by 1pkryan on Nov 6, 2013 8:13:54 GMT -6
Thanks for the stripped down reply, not touched electric side of bikes before so it's all new to me.
|
|
New Student
Currently Offline
Posts: 37
A+'s: 0
Joined: Nov 2, 2013 3:12:41 GMT -6
|
Post by 1pkryan on Nov 5, 2013 7:56:24 GMT -6
Sorry JR. Hope the other thread don't mind me using these pictures. If not i will upload my own. R/R; "second wire in: White" CDI; "second wire in: Black/White" I am getting nothing from these, don't even know if they are connected in someway. Thanks again.
|
|
New Student
Currently Offline
Posts: 37
A+'s: 0
Joined: Nov 2, 2013 3:12:41 GMT -6
|
Post by 1pkryan on Nov 5, 2013 6:00:39 GMT -6
Hello,
So i checked the wiring connections, all seem fine. Then checked voltage stuff, all seem okay apart from the white wire, that is completely dead. Not sure if this is a problem or not.
|
|
New Student
Currently Offline
Posts: 37
A+'s: 0
Joined: Nov 2, 2013 3:12:41 GMT -6
|
Post by 1pkryan on Nov 2, 2013 5:57:21 GMT -6
Thanks for the reply.
I have seen the other topics on this forum regarding this bike and seen R/R pop up a-lot, is that the 'Regulator Rectifier'?
I'm going to be away this weekend so can't really test anything, but i will be sure to look at the stuff mentioned and will get back to you once done so.
EDIT: Thanks for the wiring diagram, might come in handy.
/ Ryan.
|
|
New Student
Currently Offline
Posts: 37
A+'s: 0
Joined: Nov 2, 2013 3:12:41 GMT -6
|
Post by 1pkryan on Nov 2, 2013 3:26:23 GMT -6
Hello,
I have just brought a non-runner Honda SGX 50 and was told it had good compression and good spark. The compression seems okay, but there is no spark. I noticed that there was no battery included/connected and wondered if i actually needed a battery to get a spark? Thanks.
/Ryan.
|
|