New Student
Currently Offline
Posts: 4 
A+'s: 0
Joined: Oct 2, 2013 10:03:21 GMT -6
|
Post by reef2065 on Oct 9, 2013 12:36:54 GMT -6
I had the same problem and it was the valves...New valves will sometimes tighten by their self. Mostly the exhaust valve
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Oct 2, 2013 10:03:21 GMT -6
|
Post by reef2065 on Oct 3, 2013 19:10:16 GMT -6
What are some symptoms of valves being to loose?
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Oct 2, 2013 10:03:21 GMT -6
|
Post by reef2065 on Oct 3, 2013 12:15:26 GMT -6
I have done everything to add more fuel for the mix....I raised the diaphragm needle, opened the a/f screw, and i just received a #95 and #100 jet.I started with the 95 still lean then the 100 and same thing.I am still running very hot and lean.And if i put the stock air box on all it does is bog at WOT.The way i am checking the spark plug is running it for about 10 min untill it gets warmed up then riding at top speed then hiting the kill switch at top speed...Pull over and check its always the same color grey/white.Anymore suggestions? Thanks everyone..
John
|
|
New Student
Currently Offline
Posts: 4
A+'s: 0
Joined: Oct 2, 2013 10:03:21 GMT -6
|
Post by reef2065 on Oct 2, 2013 10:20:33 GMT -6
Hey everyone...I have a problem with my 50cc gy6 it runs good it justs runs hot and lean acorording to the sparkplug..Its greyish white ive been trying to richin the mixture up by adjusting the air fuel screw but doesnt do anything..I just recently bought a size 100 jet and put it in and my spark plug is same color....Any help would be great i dont want to overheat too bad and do a lot of damage...Thanks
BTW i have a 100cc kit with performance cam,cdi, coil,and free flow air filter.
|
|
