New Student
Currently Offline
Posts: 11
A+'s: 0
Joined: Apr 13, 2013 13:04:39 GMT -6
|
Post by nealkeeble on Apr 19, 2013 10:45:46 GMT -6
ill replace it and see how it does, thanks again for all the help, ill probably need more:P
|
|
New Student
Currently Offline
Posts: 11
A+'s: 0
Joined: Apr 13, 2013 13:04:39 GMT -6
|
Post by nealkeeble on Apr 19, 2013 10:44:57 GMT -6
so i was checking around the engine side of the carb and found this..... get the feeling it might have something to do with my problem hahaha Attachments:
|
|
New Student
Currently Offline
Posts: 11
A+'s: 0
Joined: Apr 13, 2013 13:04:39 GMT -6
|
Post by nealkeeble on Apr 19, 2013 10:32:44 GMT -6
ok thank you for the detail, im going to check and see if i can find an air leak and see if that will solve my problem because the carb is brand new, if not will post pics and follow other directions above. thanks again!!
|
|
New Student
Currently Offline
Posts: 11
A+'s: 0
Joined: Apr 13, 2013 13:04:39 GMT -6
|
Post by nealkeeble on Apr 18, 2013 14:12:36 GMT -6
alleyoop did you get the video to play? i can post another in a different format
|
|
New Student
Currently Offline
Posts: 11
A+'s: 0
Joined: Apr 13, 2013 13:04:39 GMT -6
|
Post by nealkeeble on Apr 18, 2013 14:11:53 GMT -6
so i tried the screws some more and it evened out some when i give it gas but it still dies when i try and let it idle. took the mixture screw all the way out and back in trying at every half turn, same with the idle screw
|
|
New Student
Currently Offline
Posts: 11
A+'s: 0
Joined: Apr 13, 2013 13:04:39 GMT -6
|
Post by nealkeeble on Apr 18, 2013 13:53:26 GMT -6
thanks ill keep trying that. played with it a little but not all the way out thanks
|
|
New Student
Currently Offline
Posts: 11
A+'s: 0
Joined: Apr 13, 2013 13:04:39 GMT -6
|
Post by nealkeeble on Apr 16, 2013 20:35:51 GMT -6
you have to click desktop at the top of the screen and you should be able to see it sorry, and i tried both of the screws and it continued to do the same thing without drastic changes to the srcews. i went about five turns from closed on the mixture srcew before i stopped and the idle screw as far in as it would go, will tinker some more tomorrow, thanks so much
|
|
New Student
Currently Offline
Posts: 11
A+'s: 0
Joined: Apr 13, 2013 13:04:39 GMT -6
|
Post by nealkeeble on Apr 16, 2013 17:26:35 GMT -6
got it started today!!!! only when i give it steady gas it begins to die and when i let it drop to idle it begins to die. only when i pump the throttle does it continue to run? please help!! all suggestions welcome.
here's the video:
|
|
New Student
Currently Offline
Posts: 11
A+'s: 0
Joined: Apr 13, 2013 13:04:39 GMT -6
|
Post by nealkeeble on Apr 16, 2013 17:11:31 GMT -6
and yes i think its an 06
|
|
New Student
Currently Offline
Posts: 11
A+'s: 0
Joined: Apr 13, 2013 13:04:39 GMT -6
|
Post by nealkeeble on Apr 16, 2013 17:07:40 GMT -6
thank you guys so much! it ran for the first time today!!! but when i give it steady gas it starts to die unless i pump the throttle? it also dies if i let it drop to an idle. its a new carb i dont know if that will help with the troubleshooting
|
|
New Student
Currently Offline
Posts: 11
A+'s: 0
Joined: Apr 13, 2013 13:04:39 GMT -6
|
Post by nealkeeble on Apr 13, 2013 13:21:22 GMT -6
I'm new to scooting and my neighbor gave me and old one with some parts missing that I've been rebuilding. i have the majority of the wiring system under wraps but i still cant figure out what the circled part in the attached picture is. one wire that leads to it is green and black that leads to a connector with nothing attached to it. the other lead coming off of it does go anywhere just kind of free hanging on the front. please help!! Attachments:
|
|
