New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 28, 2013 9:48:20 GMT -6
I did everything seems fine I guess...It was wierd the lights would get brighter when pushing a brake lever in..
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 28, 2013 9:17:28 GMT -6
last week I put a new stator in my 150cc scoot(8 pole) same as the original one...Did not notice at that time that the yellow and white wires were in the opposite sides of each other than the bikes harness.I started to blow dash and running lights...
My question is would that ruin the r/r?
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 28, 2013 4:55:34 GMT -6
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 27, 2013 21:58:39 GMT -6
Ahhhhh wont let the pic be posted from that wirering diagram
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 27, 2013 21:57:41 GMT -6
I have changed the stock headlight bulbs with auto H4 hali's but I think I want to wire the headlights and rear tail light to the battery..I found this wireing diagram on another forum.Does anyone think it will work?And what size diode sould be used?
This is what I found....
i don't see why the following wouldn't work for keeping both lights on.
2 Relays
First:
30: 12v +
85: low beam switch
86: 12v -
87: 12v + of low beam headlight
Second:
30: 12v +
85: high beam switch
86: 12v -
87: 12v + of low beam and high beam of headlight (diode must be placed on low beam)
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 27, 2013 21:52:19 GMT -6
still no replys?huh
Well somthing goofy is going on with this scoot...It blew the rear running filament in the bulb...Blew all dash lights,And the smaller clear bulbs next to the headlights....Put a new bulb in the tail light then unpluged the r/r and took it for a ride(aprx 1 mile)to another scooter owner to try a different r/r.And before we had a chance to try the other r/r I noticed the rear running filament was not working..Pulled the bulb out and it was blown again...wth dont get what is going on...Went back home changed the bulb again took it for another short trip with the r/r pluged in and no bulbs blew..Dont really under stand electrical crap I guess...
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 24, 2013 12:00:31 GMT -6
Really feel like pouring gas on this thing and lighting it on fire.....Fun to ride but hate to figure electrical problems out!!!I am asuming it is the r/r.Something must of happened to it when I blew out the stater.I tryed anouther one that looked the same from a kids small quad but I see an arch when pluging it in while the scoot is running.Any ideas?I checked all the wires and unpluged everything and repluged them in while it was running to see if the lights would turn on but nothing.I only get them when I plug my old r/r in..well not all the way in any way just getting it started to plug in I get the lights but when pushing the plug in all the way they shut off!
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 24, 2013 11:55:02 GMT -6
I know my headlight switch is bad got a new one in today but was the wrong size but the plug fit in and that did not help at all.
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 24, 2013 11:53:05 GMT -6
Ok it now starts but headlights and tail lights wont work..I only get brake lights..I unpluged the r/r and I get dash lights.But plug in the r/r and they go out.But if I put on the brakes everything works but very dim.WTH is going on..guess I cant take it to work tonight.
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 22, 2013 22:28:40 GMT -6
ON THE ROAD AGAIN!!!!Well I guess it is not a good Idea to wire the high and low beams to be on at the same time...It blew up my stater...I guess I would have to wire the high beams directly to the battery and a seperate switch...But first going to try Halogen bulbs!
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 13, 2013 15:45:55 GMT -6
forget it I had a guy bring over his stator for his 50cc he is building and it fired right up....IT'S ALIVE!!!Now to do some research on going to an 11 pole stator so I can run some Better bulbs!Thanks for the help!
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 13, 2013 13:26:53 GMT -6
What are the tests to tell me if mine is no good?
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 13, 2013 13:25:43 GMT -6
Now I have an 8 pole stator..If I go to an 11 pole or 18 pole,do i need an new flywheel?
|
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 10, 2013 20:46:09 GMT -6
Hmm maybe it's time for a scrappydogsscooter big bore replacement motor?  ?Or just go with T-motorsports complete replacement motor..... |
|
New Student
Currently Offline
Posts: 40
A+'s: 0
Joined: Apr 7, 2013 8:43:42 GMT -6
|
Post by kered409 on Apr 10, 2013 16:05:39 GMT -6
Thanks alleyoop!
|
|
