New Student
Currently Offline
Posts: 6
A+'s: 0
Joined: Dec 13, 2012 4:44:00 GMT -6
|
Post by scott on Aug 22, 2017 9:44:33 GMT -6
I finally got some time to trace this out.. It is wired directly to one of the ground terminals of the CDI
|
|
New Student
Currently Offline
Posts: 6
A+'s: 0
Joined: Dec 13, 2012 4:44:00 GMT -6
|
Post by scott on Aug 20, 2017 8:44:34 GMT -6
That is all that I could think of also but it does have a cable speedo
|
|
New Student
Currently Offline
Posts: 6
A+'s: 0
Joined: Dec 13, 2012 4:44:00 GMT -6
|
Post by scott on Aug 19, 2017 8:25:12 GMT -6
I have a scooter in the shop for an engine rebuild and ran into something new 'to me' on disassembly. I've serviced 100s of scooters over the years but don't remember ever seeing one with a additional pickup coil on the clutch bell. This appears to be OEM because the cover was machined to mount it. The wire plugs into the main harness right beside where the normal pickup wire is.. I'm planning to install a performance clutch with this build but need determine what this is controlling hopefully without tearing into it tracing wires... Engine is a QMB1P39  |
|
New Student
Currently Offline
Posts: 6
A+'s: 0
Joined: Dec 13, 2012 4:44:00 GMT -6
|
Hi to all
by: scott - Dec 17, 2012 8:26:17 GMT -6
Post by scott on Dec 17, 2012 8:26:17 GMT -6
Thanks for the welcome everyone. @ terrilee: There are a couple must have tools for proper Chinese scooter repair. A multimeter and 2 lb sledge hammer. Once you master those everything else is much easier  @ JR: Yep, Tons of scooters in Florida. Our business is about 80% service work because there are many scooter dealers in our area who don't offer any followup help. Most don't even bother to replace shipping oils so we stay pretty busy. @ justbuggin2: We're in Titusville which is on US1 across the river from Kennedy Space Center/NASA. You're welcome to stop in if passing by. Bring some work clothes and your hammer  |
|
New Student
Currently Offline
Posts: 6
A+'s: 0
Joined: Dec 13, 2012 4:44:00 GMT -6
|
Hi to all
by: scott - Dec 14, 2012 5:57:09 GMT -6
Post by scott on Dec 14, 2012 5:57:09 GMT -6
I was welcomed in another thread by JR so have decided to introduce myself here.
Just stumbled across this board yesterday morning while googling a fix for a odd scoot problem and found it here. There appears to be a great deal of friendly and helpful talent among this membership.
I have a shop in Central Florida that specializes in scooter service and performance builds. We've sold nearly every Chinese scooter brand over the years and are now an exclusive Bintelli Dealership but still service all makes.
I've learned a little along the way and will try to contribute to the forum where I can but don't have much free time at the moment.
Nice to meet you all!
|
|
New Student
Currently Offline
Posts: 6
A+'s: 0
Joined: Dec 13, 2012 4:44:00 GMT -6
|
fuel line
by: scott - Dec 13, 2012 7:10:45 GMT -6
Post by scott on Dec 13, 2012 7:10:45 GMT -6
|
|
