TBX 260 EFI Bulbs By mspctech2000 (Read 487 times)

[mspctech2000]

Hi All,

I was wondering if anyone knew the sizes/watts of bulbs for this scooter. Also, if they are available at local auto stores or anywhere else online other than BMS.

Thanks,

[JR]

mspctech2000 Most scooters come with 35W standard but I can't say that for sure with this scooter, one would need to remove them to confirm it? Take them out and see what style they are and we can help you shop for them.

JR

[ellpee]

Just a thought if you can stand the extra expense, if you're replacing bulbs, consider going to LEDs wherever you can. Last forever, draw far less juice from the battery/charging system. But definitely do pull the old bulbs and check for socket style, little numbers shown on the base, etc. Lots of variations out there.

[mspctech2000]

OK, I finally got it out which was a feat in itself. The imprint says Philips Duplo 12v 25/25. Not realizing it was only 25w. Prior to getting the bulb out, I bought a 35w Eiko 6235b. Do you think it would cause a problem to replace both sides with the 10 watts more?

Thanks for your help.

[cyborg]

I went from 35/35 to 45/60,,, not an issue for me,,, I don't see a problem myself by bumping it ten watts

[mspctech2000]

Thanks for your help. I installed a 35w and so far so good.