|
|
Post by jmicester on Jun 11, 2014 23:44:38 GMT -6
Thanks! Yes I believe it does have 16 inch wheels. |
|
|
|
Post by alleyoop on Jun 11, 2014 23:48:34 GMT -6
Yep 16" wheels that is a nice scoot but parts are harder to find on those and the motor as well.
Alleyoop
|
|
|
|
Post by alleyoop on Jun 12, 2014 0:09:28 GMT -6
|
|
|
|
Post by jmicester on Jun 12, 2014 1:01:51 GMT -6
I checked out the link. What does it mean when it says 57mm? Is that the whole circumference?? |
|
|
|
Post by alleyoop on Jun 12, 2014 12:50:07 GMT -6
57mm is across the piston.
Also I was going to mention The way it was damaged by the valves and the piston looks like something got in there the plug itself no parts where broke off just bent to shit. I looked again and it looks like the plug hole was rimmed out and re-threaded to fit a bigger plug WIDTH wise. I noticed that the bottom of the plug hole was smooth and oblong like someone drilled right down and look at the piston it looks like the drill actually hit the head and pieces of metal did all the damage.
The bent plug did NOT make all that damage it was the metal shavings or and the drill actualy drilling into the piston you can see a small round indentation where the drill bit right into the piston.
Alleyoop
|
|
|
|
Post by jmicester on Jun 12, 2014 18:15:37 GMT -6
57mm is across the piston. Also I was going to mention The way it was damaged by the valves and the piston looks like something got in there the plug itself no parts where broke off just bent to shit. I looked again and it looks like the plug hole was rimmed out and re-threaded to fit a bigger plug WIDTH wise. I noticed that the bottom of the plug hole was smooth and oblong like someone drilled right down and look at the piston it looks like the drill actually hit the head and pieces of metal did all the damage. The bent plug did NOT make all that damage it was the metal shavings or and the drill actualy drilling into the piston you can see a small round indentation where the drill bit right into the piston. Alleyoop [ I'm not too sure why the previous owner would Try to put a bigger spark plug on that. Also I am trying to take off the head And I'm running into trouble The frame is in the way so I cannot slide it off. What would be the most efficient way to take off the head? |
|
|
|
Post by alleyoop on Jun 12, 2014 18:24:45 GMT -6
Try taking it off the CENTER Stand when you do that it moves the swingarm and it may be enough to clear it so you can pull it off.
Alleyoop
|
|
|
|
Post by jmicester on Jun 12, 2014 18:50:16 GMT -6
Right now it's on the kickstand and still no luck.  Do those 4 long screws come off??? |
|
|
|
Post by alleyoop on Jun 12, 2014 18:57:19 GMT -6
Bummer, and yes those are screwed into the CASE of the motor and hold the top end together. But I would take the BOLT out that holds the motor to the motor mounts and drop the front of the motor down just enough to be able to work on it. You can put a block of wood under the motor to rest on. If you strip those long bolts in the case then your in bigger trouble.
I would not take the long studs out.
Alleyoop
|
|
|
|
Post by jmicester on Jun 12, 2014 19:07:30 GMT -6
Bummer, and yes those are screwed into the CASE of the motor and hold the top end together. But I would take the BOLT out that holds the motor to the motor mounts and drop the front of the motor down just enough to be able to work on it. You can put a block of wood under the motor to rest on. If you strip those long bolts in the case then your in bigger trouble. I would not take the long studs out. Alleyoop Okay I will try that. Where would that bolt be located? |
|
|
|
Post by alleyoop on Jun 12, 2014 19:14:12 GMT -6
Ususally right before the carb you either have 1 bolt on each side or 1 long bolt going across the top of the motor near the carb.
Alleyoop
|
|
|
|
Post by alleyoop on Jun 12, 2014 19:19:32 GMT -6
I think I can see it here"  |
|
|
|
Post by alleyoop on Jun 12, 2014 19:25:38 GMT -6
It is ONE bolt going across or one bolt on each side?
Alleyoop
|
|
|
|
Post by jmicester on Jun 12, 2014 19:27:09 GMT -6
I think this is the bolt.
|
|
|
|
Post by alleyoop on Jun 12, 2014 19:40:34 GMT -6
Yep that is it, is it 1 bolt going to the other motor mount or does it have a bolt on each motor mount
|
|
..BAD TO THE BONE..