260 TBX scooter headlight replacement By 27yankees (Read 1,079 times)

[27yankees]

Hi Guys 
how easy is it to change headlight bulbs on my 2013 BMS TBX 260 ?

Any help will be much appreciated



Thanks



Vince

[JR]

I've never done it on this scooter but like with most one has to pull the front plastic cowling off to get to the lights.

JR

[27yankees]

Nope JR , cant change them by removing the plastic .

[bhinch]

You can not change the bulbs by pulling the clear lens. Like JR said, the front nose piece has to be removed. If you have a Roketa type scoot...MC 54B 257 cc....You have to remove the bulbs from the rear of the nose piece. I installed H4....9003...Bi-Xenon....Hi/Lo
35 watt....5000K HID's. Had to remove the front nose piece....

[trailheadmike]

It is very easy to get the plastic off and change the bulbs. While you're changing them I recommend changing the wattage from 35w to 45w if you're not going to go with an HID changeover. That 10 extra watts makes a big difference. The bulb is Eiko 6245b and widely available on line.

Let me know if you are unsure about removing the plastics. I have a pdf of the how-to-remove-the-plastics-on-a-Vog 260 that I luckily downloaded from the old site before the pics dissappeared. It's a little dark but its a good guide. Let me know.

-Mike

[27yankees]

Thanks Mike

please send the directions on how to remove the plastic that will never again fit back in place LOL   

[trailheadmike]

27yankees - I sent you a pm. Please send me an email address so I can send the pdf. I don't see a button to attach a file in the message setup choices. Thanaks.

[27yankees]

No worries

[e-mail]

thanks again